Vagrant Debian support (and experimental CentOS)
This changes the Vagrant setup to support multiple installations as multiple boxes. In addition to Ubuntu Vagrant can now be used to install on Debian as well as on CentOS. I took the chance to clean up the .deb install a bit and backported analyzer and celery to SysV proper so it runs there. Some of the distro specfics were moved to the install script from the python setup scripts to acheive this. For the CentOS support I added a rather involved OS prepare script. In the long term this will be added to the preparing-the-server docs we already have. I had to switch the default port to http-alt (8080). On CentOS 9080 is registered for ocsp and getting it to work for apache without hacking SELinux is hard. I think 8080 is the RFC way to go anyhow. If anyone want to override this it should be rather easy using the --web-port arg and by hacking Vagrantfile. The PyOpenSSL code has been refactored for all the distros that the Vagrantfile now supports. As far as my checks go, I tried this code with all the distros, uploaded a track and downloaded a unicode and a ssl podcast and was able to listen to them in each case. In the experimental CentOS case, the UI is not up to spec since services need to get scheduled through systemctl and the status overview (ie. on the /?config page) do not work properly. They need to be as follows: ``` sudo systemctl start airtime-playout sudo systemctl start airtime-liquidsoap sudo systemctl start airtime_analyzer.service sudo systemctl start airtime-celery.service ```
This commit is contained in:
Lucas Bickel
parent
c8b4d40eb2
commit
c29285ae48
|
|
@ -3,10 +3,8 @@
|
|||
|
||||
Vagrant.configure("2") do |config|
|
||||
|
||||
config.vm.box = "ubuntu/trusty64"
|
||||
|
||||
# libretime web interface
|
||||
config.vm.network "forwarded_port", guest: 9080, host:9080
|
||||
config.vm.network "forwarded_port", guest: 8080, host:8080
|
||||
# icecast2
|
||||
config.vm.network "forwarded_port", guest: 8000, host:8000
|
||||
# liquidsoap input harbors for instreaming (ie. /master)
|
||||
|
|
@ -14,6 +12,11 @@ Vagrant.configure("2") do |config|
|
|||
# mkdics documentation
|
||||
config.vm.network "forwarded_port", guest: 8888, host:8888
|
||||
|
||||
# make sure we are using nfs (doesn't work out of the box with debian)
|
||||
config.vm.synced_folder ".", "/vagrant", type: "nfs"
|
||||
# private network for nfs
|
||||
config.vm.network "private_network", ip: "192.168.10.100"
|
||||
|
||||
config.vm.provider "virtualbox" do |v|
|
||||
# to run without OOMing we need at least 1GB of RAM
|
||||
v.memory = 1024
|
||||
|
|
@ -29,21 +32,33 @@ Vagrant.configure("2") do |config|
|
|||
end
|
||||
end
|
||||
|
||||
# ubuntu/trusty64 alsa setup
|
||||
# slightly modernized from https://github.com/naomiaro/vagrant-alsa-audio
|
||||
# https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS
|
||||
config.vm.provision "shell", inline: <<-SHELL
|
||||
alsa_deb="oem-audio-hda-daily-dkms_0.201703070301~ubuntu14.04.1_all.deb"
|
||||
wget -nv https://code.launchpad.net/~ubuntu-audio-dev/+archive/ubuntu/alsa-daily/+files/${alsa_deb}
|
||||
sudo dpkg -i ${alsa_deb}
|
||||
rm ${alsa_deb}
|
||||
sudo DEBIAN_FRONTEND=noninteractive apt-get -y -m --force-yes install alsa
|
||||
sudo usermod -a -G audio vagrant
|
||||
# liquidsoap runs as apache
|
||||
sudo usermod -a -G audio www-data
|
||||
SHELL
|
||||
config.vm.provision "shell", inline: "cd /vagrant; ./install -fIiapv --web-port=9080"
|
||||
config.vm.provision "shell", path: "docs/scripts/install.sh"
|
||||
config.vm.provision "shell", path: "docs/scripts/serve.sh"
|
||||
# default installer args used for all distros
|
||||
installer_args="--force --in-place --verbose --postgres --apache --icecast "
|
||||
|
||||
# define all the OS boxes we support
|
||||
config.vm.define "ubuntu" do |os|
|
||||
os.vm.box = "ubuntu/trusty64"
|
||||
provision_libretime(os, "ubuntu.sh", installer_args + "--distribution=ubuntu --release=trusty")
|
||||
end
|
||||
config.vm.define "debian" do |os|
|
||||
os.vm.box = "debian/jessie64"
|
||||
provision_libretime(os, "debian.sh", installer_args + "--distribution=debian --release=jessie")
|
||||
end
|
||||
config.vm.define "centos" do |os|
|
||||
os.vm.box = 'centos/7'
|
||||
provision_libretime(os, "centos.sh", installer_args + "--ignore-dependencies --distribution=centos --web-user=apache")
|
||||
end
|
||||
|
||||
def provision_libretime(config, prepare_script, installer_args)
|
||||
# Prepare OS
|
||||
config.vm.provision "prepare", type: "shell", path: "installer/vagrant/%s" % prepare_script
|
||||
|
||||
# Provision LibreTime
|
||||
config.vm.provision "install", type: "shell", inline: "cd /vagrant; ./install %s --web-port=8080" % installer_args
|
||||
|
||||
# Provision docs
|
||||
config.vm.provision "install-mkdocs", type: "shell", path: "docs/scripts/install.sh"
|
||||
config.vm.provision "start-mkdocs", type: "shell", path: "docs/scripts/serve.sh"
|
||||
end
|
||||
|
||||
end
|
||||
|
|
|
|||
|
|
@ -91,7 +91,8 @@ class Application_Service_PodcastService
|
|||
$podcastArray["language"] = htmlspecialchars($rss->get_language());
|
||||
$podcastArray["copyright"] = htmlspecialchars($rss->get_copyright());
|
||||
|
||||
$name = empty($rss->get_author()) ? "" : $rss->get_author()->get_name();
|
||||
$author = $rss->get_author();
|
||||
$name = empty($author) ? "" : $author->get_name();
|
||||
$podcastArray["creator"] = htmlspecialchars($name);
|
||||
|
||||
$categories = array();
|
||||
|
|
|
|||
|
|
@ -20,10 +20,10 @@ The easiest way to check out LibreTime for yourself is to run a local instance i
|
|||
```bash
|
||||
git clone https://github.com/libretime/libretime.git
|
||||
cd libretime
|
||||
vagrant up
|
||||
vagrant up ubuntu
|
||||
```
|
||||
|
||||
If everything works out, you will find LibreTime on [port 9080](http://localhost:9080), icecast on [port 8000](http://localhost:8000) and the docs on [port 8888](http://localhost:8888).
|
||||
If everything works out, you will find LibreTime on [port 8080](http://localhost:8080), icecast on [port 8000](http://localhost:8000) and the docs on [port 8888](http://localhost:8888).
|
||||
|
||||
Of course, this setup isn't appropriate for production use. For that, check out our [installation instructions](install.md). More information on the vagrant setup are in [the docs](vagrant.md).
|
||||
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ These Airtime instructions are outdated, see [install.md](../../install.md) for
|
|||
|
||||
The following instructions assume that you have root access (**sudo** on Ubuntu) to a GNU/Linux server, and are familiar with basic command line tasks. Experienced system administrators may prefer to skip to the *Expert install* chapter in the appendix of this book after preparing the server as shown in the steps below.
|
||||
|
||||
The recommended Airtime server platform is Debian 7.2 'wheezy'. Ubuntu 12.04 LTS 'Precise Pangolin' is also supported. Users of other GNU/Linux distributions may be able to adapt these instructions to suit their needs.
|
||||
The recommended Airtime server platform is Debian 8 'jessie'. Ubuntu 14.04 LTS 'Trusty Tahir' is also supported. Users of other GNU/Linux distributions may be able to adapt these instructions to suit their needs.
|
||||
|
||||
The server should have at least a 1GHz processor and 1GB of RAM, preferably 2GB RAM or more. If you are using a desktop environment and web browser directly on the server you should install at least 2GB RAM, to avoid swapping to disk.
|
||||
|
||||
|
|
|
|||
|
|
@ -20,13 +20,25 @@ To get started you clone the repo and run `vagrant up`.
|
|||
```bash
|
||||
git clone https://github.com/libretime/libretime.git
|
||||
cd libretime
|
||||
vagrant up
|
||||
vagrant up ubuntu
|
||||
```
|
||||
|
||||
If everything works out, you will find LibreTime on [port 9080](http://localhost:9080), icecast on [port 8000](http://localhost:8000) and the docs on [port 8888](http://localhost:8888).
|
||||
If everything works out, you will find LibreTime on [port 8080](http://localhost:8080), icecast on [port 8000](http://localhost:8000) and the docs on [port 8888](http://localhost:8888).
|
||||
|
||||
Once you reach the web setup GUI you can click through it using the default values. To connect to the vagrant machine you can run `vagrant ssh` in the libretime directory.
|
||||
Once you reach the web setup GUI you can click through it using the default values. To connect to the vagrant machine you can run `vagrant ssh ubuntu` in the libretime directory.
|
||||
|
||||
## Alternative OS installations
|
||||
|
||||
With the above instructions LibreTime is installed on Ubuntu Trusty Tahir. The Vagrant setup offers the option to choose a different operation system according to you needs.
|
||||
|
||||
| OS | Command | Comment |
|
||||
| ------ | ------------------- | ------- |
|
||||
| Ubuntu | `vagrant up ubuntu` | Current default install since it was used by legacy upstream, based on Trusty Tahir . |
|
||||
| Debian | `vagrant up debian` | Recommended install on Jessie as per the docs. |
|
||||
| CentOS | `vagrant up centos` | Experimental install on 7.3 with native systemd support and activated SELinux. |
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
If anything fails during the initial provisioning step you can try running `vagrant provision` to rerun the installer.
|
||||
|
||||
If you only want to re-run parts of the installer, use `--provision-with install`. The supported steps are `prepare`, `install`, `install-mkdocs` and `start-mkdocs`.
|
||||
|
|
|
|||
122
install
122
install
|
|
@ -1,4 +1,5 @@
|
|||
#!/bin/bash -e
|
||||
|
||||
#-e Causes bash script to exit if any of the installers
|
||||
#return with a non-zero return value.
|
||||
|
||||
|
|
@ -75,6 +76,8 @@ _q=0
|
|||
upgrade="f"
|
||||
dist=""
|
||||
code=""
|
||||
apache_bin="apache2"
|
||||
|
||||
|
||||
function verbose() {
|
||||
if [[ ${_v} -eq 1 ]]; then
|
||||
|
|
@ -299,6 +302,9 @@ echo "| |___| || \_\ \ | \/\ ___/| | | | Y Y \ ___/ "
|
|||
echo "|_______ \__||___ /__| \___ >____| |__|__|_| /\___ >"
|
||||
echo -e " \/ \/ \/ \/ \/\n"
|
||||
|
||||
if [ "$dist" = "centos" ]; then
|
||||
apache_bin="httpd"
|
||||
fi
|
||||
|
||||
if [ "$ignore_dependencies" = "f" ]; then
|
||||
set +e
|
||||
|
|
@ -324,7 +330,7 @@ if [ "$ignore_dependencies" = "f" ]; then
|
|||
fi
|
||||
set -e
|
||||
else
|
||||
checkCommandExists "apache2"
|
||||
checkCommandExists "${apache_bin}"
|
||||
checkCommandExists "rabbitmqctl"
|
||||
checkCommandExists "psql"
|
||||
if [ "$in_place" = "t" ]; then
|
||||
|
|
@ -338,8 +344,10 @@ eval hash "composer" 2>/dev/null
|
|||
commandFound=$?
|
||||
set -e
|
||||
if [[ ! ${commandFound} -eq 0 ]]; then
|
||||
curl -sS https://getcomposer.org/installer | php
|
||||
mv composer.phar /usr/local/bin/composer
|
||||
curl -sS https://getcomposer.org/installer > get-composer.php
|
||||
php ./get-composer.php --install-dir=/usr/local/bin --filename=composer
|
||||
rm get-composer.php
|
||||
PATH="${PATH}:/usr/local/bin"
|
||||
fi
|
||||
|
||||
# Run composer (install PHP dependencies) and create a VERSION file
|
||||
|
|
@ -414,9 +422,13 @@ if [ "$apache" = "t" ]; then
|
|||
loud "\n-----------------------------------------------------"
|
||||
loud " * Configuring Apache * "
|
||||
loud "-----------------------------------------------------"
|
||||
apache_sitedir="/etc/apache2/sites-available/"
|
||||
if [ "$dist" = "centos" ]; then
|
||||
apache_sitedir="/etc/httpd/conf.d/"
|
||||
fi
|
||||
|
||||
set +e
|
||||
apache2 -v | grep "2\.4" > /dev/null
|
||||
$apache_bin -v | grep "2\.4" > /dev/null
|
||||
apacheversion=$?
|
||||
set -e
|
||||
|
||||
|
|
@ -432,7 +444,7 @@ if [ "$apache" = "t" ]; then
|
|||
# install apache, we should overwrite any existing configuration. If we don't do this, doing
|
||||
# an in-place installation over an old Airtime install (which installs to /usr/share by default)
|
||||
# will fail
|
||||
if [ "$upgrade" = "t" -o ! -f /etc/apache2/sites-available/${airtimeconfigfile} ]; then
|
||||
if [ "$upgrade" = "t" -o ! -f ${apache_sitedir}${airtimeconfigfile} ]; then
|
||||
verbose "\n * Creating Apache config for Airtime..."
|
||||
listen_port=""
|
||||
if [ "$web_port" != "80" ]; then
|
||||
|
|
@ -448,15 +460,19 @@ if [ "$apache" = "t" ]; then
|
|||
-e "s@WEB_PORT_LISTEN@${listen_port}@g" \
|
||||
-e "s@WEB_PORT@${web_port}@g" \
|
||||
-e "s@WEB_ROOT@${web_root}@g" \
|
||||
${apache_template_file} > /etc/apache2/sites-available/${airtimeconfigfile}
|
||||
${apache_template_file} > ${apache_sitedir}${airtimeconfigfile}
|
||||
|
||||
loudCmd "a2dissite 000-default"
|
||||
if [ "$dist" != "centos" ]; then
|
||||
loudCmd "a2dissite 000-default"
|
||||
fi
|
||||
# If Airtime was previously installed with apt, the vhost file name is different,
|
||||
# so we need to specifically disable it.
|
||||
if [ -f "/etc/apache2/sites-available/${oldconfigfile}" ]; then
|
||||
loudCmd "a2dissite airtime-vhost"
|
||||
fi
|
||||
loudCmd "a2ensite airtime"
|
||||
if [ "$dist" != "centos" ]; then
|
||||
loudCmd "a2ensite airtime"
|
||||
fi
|
||||
else
|
||||
verbose "\nApache config for Airtime already exists, skipping"
|
||||
fi
|
||||
|
|
@ -476,9 +492,15 @@ if [ "$icecast" = "t" ]; then
|
|||
loud "-----------------------------------------------------"
|
||||
|
||||
verbose "\n * Enabling Icecast 2..."
|
||||
sed -i 's/ENABLE=false/ENABLE=true/g' /etc/default/icecast2
|
||||
icecast_unit_name="icecast2"
|
||||
if [ "$dist" != "centos" ]; then
|
||||
sed -i 's/ENABLE=false/ENABLE=true/g' /etc/default/icecast2
|
||||
else
|
||||
icecast_unit_name="icecast"
|
||||
fi
|
||||
set +e
|
||||
loudCmd "service icecast2 start"
|
||||
# restart in case icecast was already started (like is the case on debian)
|
||||
loudCmd "service ${icecast_unit_name} restart"
|
||||
set -e
|
||||
verbose "...Done"
|
||||
fi
|
||||
|
|
@ -491,13 +513,17 @@ verbose "\n * Installing necessary python services..."
|
|||
loudCmd "pip install setuptools --upgrade"
|
||||
verbose "...Done"
|
||||
|
||||
|
||||
|
||||
if [[ `lsb_release -rs` == "14.04" ]] # Ubuntu trusty needs a workaround for python version SSL downloads
|
||||
then
|
||||
loudCmd "pip install pyOpenSSL cryptography idna certifi --upgrade"
|
||||
# Ubuntu trusty needs a workaround for python version SSL downloads
|
||||
# This affects all python installs where python < 2.7.9
|
||||
use_pyopenssl=""
|
||||
if [ "$dist" != "debian" ] || [ "$code" = "wheezy" ]; then
|
||||
use_pyopenssl="t"
|
||||
fi
|
||||
if [ "$use_pyopenssl" = "t" ]; then
|
||||
verbose "\n * Installing pyOpenSSL and ca db for SNI support..."
|
||||
loudCmd "pip install pyOpenSSL cryptography idna certifi --upgrade"
|
||||
verbose "...Done"
|
||||
fi
|
||||
|
||||
|
||||
verbose "\n * Creating /run/airtime..."
|
||||
mkdir -p /run/airtime
|
||||
|
|
@ -519,11 +545,29 @@ verbose "...Done"
|
|||
|
||||
verbose "\n * Installing airtime-celery..."
|
||||
loudCmd "python ${AIRTIMEROOT}/python_apps/airtime-celery/setup.py install"
|
||||
# Make the airtime log directory group-writable
|
||||
loudCmd "chmod 775 /var/log/airtime"
|
||||
# Create the Celery user
|
||||
if [ "$dist" = "centos" ]; then
|
||||
loudCmd "id celery || adduser --no-create-home -c 'LibreTime Celery' -r celery || true"
|
||||
loudCmd "systemctl enable airtime-celery"
|
||||
else
|
||||
loudCmd "id celery || adduser --no-create-home --gecos 'LibreTime Celery' --disabled-login --firstuid 1 --lastuid 999 celery"
|
||||
loudCmd "update-rc.d airtime-celery defaults"
|
||||
fi
|
||||
# Add celery to the www-data group
|
||||
loudCmd "usermod -G ${web_user} -a celery"
|
||||
|
||||
if [ "$dist" = "ubuntu" ]; then
|
||||
loudCmd "initctl reload-configuration"
|
||||
fi
|
||||
verbose "...Done"
|
||||
|
||||
verbose "\n * Installing airtime_analyzer..."
|
||||
loudCmd "python ${AIRTIMEROOT}/python_apps/airtime_analyzer/setup.py install --install-scripts=/usr/bin"
|
||||
loudCmd "initctl reload-configuration"
|
||||
if [ "$dist" = "ubuntu" ]; then
|
||||
loudCmd "initctl reload-configuration"
|
||||
fi
|
||||
verbose "...Done"
|
||||
|
||||
for i in /etc/init/airtime*.template; do
|
||||
|
|
@ -533,20 +577,31 @@ for i in /etc/init/airtime*.template; do
|
|||
done
|
||||
|
||||
set +e
|
||||
loudCmd "initctl reload-configuration"
|
||||
if [ "$dist" = "ubuntu" ]; then
|
||||
loudCmd "initctl reload-configuration"
|
||||
fi
|
||||
|
||||
# airtime-celery only has an init.d startup script
|
||||
loudCmd "update-rc.d airtime-celery defaults" # Start at bootup, on Debian
|
||||
if [ "$dist" = "centos" ]; then
|
||||
loudCmd "systemctl enable airtime-celery"
|
||||
else
|
||||
loudCmd "update-rc.d airtime-celery defaults" # Start at bootup, on Debian
|
||||
fi
|
||||
|
||||
# On Ubuntu, we already have the upstart configs, so this is redundant
|
||||
# and causes multiple processes to spawn on startup
|
||||
if [ "$dist" != "ubuntu" ]; then
|
||||
if [ "$dist" = "debian" ]; then
|
||||
loudCmd "systemctl daemon-reload" #systemd hipsters
|
||||
|
||||
loudCmd "update-rc.d airtime-playout defaults" # Start at bootup, on Debian
|
||||
loudCmd "update-rc.d airtime-liquidsoap defaults" # Start at bootup, on Debian
|
||||
loudCmd "update-rc.d airtime_analyzer defaults" # Start at bootup, on Debian
|
||||
fi
|
||||
if [ "$dist" = "centos" ]; then
|
||||
loudCmd "systemctl enable airtime-playout"
|
||||
loudCmd "systemctl enable airtime-liquidsoap"
|
||||
loudCmd "systemctl enable airtime_analyzer"
|
||||
fi
|
||||
set -e
|
||||
|
||||
if [ ! -d /var/log/airtime ]; then
|
||||
|
|
@ -571,15 +626,21 @@ chmod -R a+x /var/tmp/airtime
|
|||
chown -R ${web_user}:${web_user} /var/tmp/airtime/
|
||||
|
||||
# PHP Config File for Apache
|
||||
if [ ! -f "/etc/php5/apache2/conf.d/airtime.ini" ]; then
|
||||
verbose "\n * Creating Airtime PHP config for Apache..."
|
||||
cp ${SCRIPT_DIR}/installer/php/airtime.ini /etc/php5/apache2/conf.d/airtime.ini
|
||||
libretime_phpini="/etc/php5/apache2/conf.d/airtime.ini"
|
||||
if [ "$dist" = "centos" ]; then
|
||||
libretime_phpini="/etc/php.d/airtime.ini"
|
||||
fi
|
||||
if [ ! -f "${libretime_phpini}" ]; then
|
||||
verbose "\n * Creating LibreTime PHP config for Apache..."
|
||||
cp ${SCRIPT_DIR}/installer/php/airtime.ini ${libretime_phpini}
|
||||
else
|
||||
verbose "\nAirtime PHP config for Apache already exists, skipping"
|
||||
fi
|
||||
|
||||
# Enable Apache modules
|
||||
loudCmd "a2enmod rewrite php5"
|
||||
if [ "$dist" != "centos" ]; then
|
||||
loudCmd "a2enmod rewrite php5"
|
||||
fi
|
||||
|
||||
loud "\n-----------------------------------------------------"
|
||||
loud " * Configuring PostgreSQL * "
|
||||
|
|
@ -687,9 +748,18 @@ if [ "$ignore_dependencies" = "f" ]; then
|
|||
fi
|
||||
|
||||
verbose "\n * Reloading apache..."
|
||||
loudCmd "service apache2 reload 2>/dev/null"
|
||||
if [ "$dist" != "centos" ]; then
|
||||
loudCmd "service ${apache_bin} reload 2>/dev/null"
|
||||
verbose "...Done"
|
||||
|
||||
IP=$(ifconfig eth0 2>/dev/null|awk '/inet addr:/ {print $2}'|sed 's/addr://')
|
||||
IP=$(ifconfig eth0 2>/dev/null|awk '/inet addr:/ {print $2}'|sed 's/addr://')
|
||||
else
|
||||
verbose "systemctl restart ${apache_bin} 2>/dev/null"
|
||||
loudCmd "systemctl restart ${apache_bin} 2>/dev/null"
|
||||
verbose "...Done"
|
||||
|
||||
IP=$(ip -o -4 address show dev eth0 | grep -Po 'inet \K[\d.]+')
|
||||
fi
|
||||
|
||||
echo -e "\n-----------------------------------------------------"
|
||||
echo " * Basic Setup DONE! * "
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ patch
|
|||
|
||||
icecast2
|
||||
|
||||
curl
|
||||
php5-curl
|
||||
mpg123
|
||||
|
||||
|
|
|
|||
|
|
@ -1,68 +0,0 @@
|
|||
apache2
|
||||
libapache2-mod-php5
|
||||
php5
|
||||
php-pear
|
||||
php5-gd
|
||||
php5-json
|
||||
|
||||
lsb-release
|
||||
|
||||
rabbitmq-server
|
||||
|
||||
postgresql
|
||||
postgresql-client
|
||||
php5-pgsql
|
||||
|
||||
python
|
||||
python-virtualenv
|
||||
python-pip
|
||||
|
||||
libsoundtouch-ocaml
|
||||
libtaglib-ocaml
|
||||
libao-ocaml
|
||||
libmad-ocaml
|
||||
ecasound
|
||||
libportaudio2
|
||||
libsamplerate0
|
||||
|
||||
patch
|
||||
|
||||
php5-curl
|
||||
mpg123
|
||||
|
||||
icecast2
|
||||
|
||||
libcamomile-ocaml-data
|
||||
libpulse0
|
||||
vorbis-tools
|
||||
lsb-release
|
||||
lsof
|
||||
mp3gain
|
||||
vorbisgain
|
||||
flac
|
||||
vorbis-tools
|
||||
pwgen
|
||||
libfaad2
|
||||
php-apc
|
||||
|
||||
lame
|
||||
|
||||
coreutils
|
||||
|
||||
liquidsoap
|
||||
liquidsoap-plugin-alsa
|
||||
liquidsoap-plugin-ao
|
||||
liquidsoap-plugin-faad
|
||||
liquidsoap-plugin-flac
|
||||
liquidsoap-plugin-icecast
|
||||
liquidsoap-plugin-lame
|
||||
liquidsoap-plugin-mad
|
||||
liquidsoap-plugin-ogg
|
||||
liquidsoap-plugin-portaudio
|
||||
liquidsoap-plugin-pulseaudio
|
||||
liquidsoap-plugin-taglib
|
||||
liquidsoap-plugin-voaacenc
|
||||
liquidsoap-plugin-vorbis
|
||||
|
||||
silan
|
||||
libopus0
|
||||
|
|
@ -1,68 +0,0 @@
|
|||
apache2
|
||||
libapache2-mod-php5
|
||||
php5
|
||||
php-pear
|
||||
php5-gd
|
||||
|
||||
lsb-release
|
||||
|
||||
rabbitmq-server
|
||||
|
||||
postgresql
|
||||
postgresql-client
|
||||
php5-pgsql
|
||||
|
||||
python
|
||||
python-virtualenv
|
||||
python-pip
|
||||
|
||||
libsoundtouch-ocaml
|
||||
libtaglib-ocaml
|
||||
libao-ocaml
|
||||
libmad-ocaml
|
||||
ecasound
|
||||
libportaudio2
|
||||
libsamplerate0
|
||||
|
||||
patch
|
||||
|
||||
php5-curl
|
||||
mpg123
|
||||
|
||||
icecast2
|
||||
|
||||
libcamomile-ocaml-data
|
||||
libpulse0
|
||||
vorbis-tools
|
||||
lsb-release
|
||||
lsof
|
||||
vorbisgain
|
||||
flac
|
||||
vorbis-tools
|
||||
pwgen
|
||||
libfaad2
|
||||
php-apc
|
||||
|
||||
lame
|
||||
|
||||
coreutils
|
||||
|
||||
liquidsoap
|
||||
liquidsoap-plugin-alsa
|
||||
liquidsoap-plugin-ao
|
||||
liquidsoap-plugin-faad
|
||||
liquidsoap-plugin-flac
|
||||
liquidsoap-plugin-icecast
|
||||
liquidsoap-plugin-lame
|
||||
liquidsoap-plugin-mad
|
||||
liquidsoap-plugin-ogg
|
||||
liquidsoap-plugin-portaudio
|
||||
liquidsoap-plugin-pulseaudio
|
||||
liquidsoap-plugin-taglib
|
||||
liquidsoap-plugin-voaacenc
|
||||
liquidsoap-plugin-vorbis
|
||||
|
||||
silan
|
||||
libopus0
|
||||
|
||||
sysvinit-utils
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
[Unit]
|
||||
Description=LibreTime Celery Service
|
||||
After=network.target
|
||||
|
||||
[Service]
|
||||
User=celery
|
||||
Group=celery
|
||||
Environment=RMQ_CONFIG_FILE=/etc/airtime/airtime.conf
|
||||
WorkingDirectory=/srv/airtime
|
||||
ExecStart=/bin/celery worker -A airtime-celery.tasks:celery --time-limit=300 --concurrency=1 --config=celeryconfig -l INFO
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
[Unit]
|
||||
Description=Airtime Liquidsoap Service
|
||||
|
||||
[Service]
|
||||
ExecStart=/usr/bin/airtime-liquidsoap
|
||||
User=libretime-playout
|
||||
Group=libretime-playout
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
[Unit]
|
||||
Description=Airtime Playout Service
|
||||
|
||||
[Service]
|
||||
ExecStart=/usr/bin/airtime-playout
|
||||
User=libretime-pypo
|
||||
Group=libretime-pypo
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
[Unit]
|
||||
Description=LibreTime Media Analyzer Service
|
||||
|
||||
[Service]
|
||||
ExecStart=/usr/bin/airtime_analyzer
|
||||
User=airtime-analyzer
|
||||
Group=airtime-analyzer
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
|
@ -0,0 +1,154 @@
|
|||
#!/bin/bash
|
||||
|
||||
# Additional Repos
|
||||
yum install -y epel-release
|
||||
|
||||
# Nux Dextop
|
||||
yum install -y http://li.nux.ro/download/nux/dextop/el7/x86_64/nux-dextop-release-0-5.el7.nux.noarch.rpm
|
||||
|
||||
# We are after PUIAS Unsupported where we get celery from
|
||||
# the install needs forcing since springdale-core tries to replace centos-release
|
||||
curl -O http://springdale.math.ias.edu/data/puias/6/x86_64/os/Packages/springdale-unsupported-6-2.sdl6.10.noarch.rpm
|
||||
rpm -hiv --nodeps springdale-unsupported-6-2.sdl6.10.noarch.rpm
|
||||
rm -f springdale-unsupported-6-2.sdl6.10.noarch.rpm
|
||||
# we need to install the key manually since it is also part of springdale-core
|
||||
curl -O http://puias.princeton.edu/data/puias/6/x86_64/os/RPM-GPG-KEY-puias
|
||||
rpm --import RPM-GPG-KEY-puias
|
||||
rm -f RPM-GPG-KEY-puias
|
||||
|
||||
# RaBe Liquidsoap Distribution (RaBe LSD)
|
||||
curl -o /etc/yum.repos.d/home:radiorabe:liquidsoap.repo \
|
||||
http://download.opensuse.org/repositories/home:/radiorabe:/liquidsoap/CentOS_7/home:radiorabe:liquidsoap.repo
|
||||
|
||||
# RaBe Audio Packages for Enterprise Linux (RaBe APEL)
|
||||
curl -o /etc/yum.repos.d/home:radiorabe:audio.repo \
|
||||
http://download.opensuse.org/repositories/home:/radiorabe:/audio/CentOS_7/home:radiorabe:audio.repo
|
||||
|
||||
# Update all the things (just to be sure we are on latest)
|
||||
yum update -y
|
||||
|
||||
# Database
|
||||
yum install -y postgresql-server patch
|
||||
|
||||
postgresql-setup initdb
|
||||
|
||||
patch -f /var/lib/pgsql/data/pg_hba.conf << EOD
|
||||
--- /var/lib/pgsql/data/pg_hba.conf.orig2016-09-01 20:45:11.364000000 -0400
|
||||
+++ /var/lib/pgsql/data/pg_hba.conf2016-09-01 20:46:17.939000000 -0400
|
||||
@@ -78,10 +78,11 @@
|
||||
|
||||
# "local" is for Unix domain socket connections only
|
||||
local all all peer
|
||||
+local all all md5
|
||||
# IPv4 local connections:
|
||||
-host all all 127.0.0.1/32 ident
|
||||
+host all all 127.0.0.1/32 md5
|
||||
# IPv6 local connections:
|
||||
-host all all ::1/128 ident
|
||||
+host all all ::1/128 md5
|
||||
# Allow replication connections from localhost, by a user with the
|
||||
# replication privilege.
|
||||
#local replication postgres peer
|
||||
EOD
|
||||
|
||||
systemctl enable postgresql
|
||||
systemctl start postgresql
|
||||
# create database user airtime with password airtime
|
||||
useradd airtime
|
||||
echo "airtime:airtime" | chpasswd
|
||||
|
||||
su -l postgres bash -c 'createuser airtime'
|
||||
su -l postgres bash -c 'createdb -O airtime airtime'
|
||||
|
||||
echo "ALTER USER airtime WITH PASSWORD 'airtime';" | su -l postgres bash -c psql
|
||||
echo "GRANT ALL PRIVILEGES ON DATABASE airtime TO airtime;" | su -l postgres bash -c psql
|
||||
|
||||
|
||||
# RabbitMQ
|
||||
yum install -y rabbitmq-server
|
||||
|
||||
systemctl enable rabbitmq-server
|
||||
systemctl start rabbitmq-server
|
||||
|
||||
rabbitmqctl add_user airtime airtime
|
||||
rabbitmqctl add_vhost /airtime
|
||||
rabbitmqctl set_permissions -p /airtime airtime ".*" ".*" ".*"
|
||||
|
||||
# LibreTime deps
|
||||
yum install -y \
|
||||
git \
|
||||
php \
|
||||
php-xml \
|
||||
php-pdo \
|
||||
php-pgsql \
|
||||
php-bcmath \
|
||||
php-mbstring \
|
||||
httpd \
|
||||
liquidsoap \
|
||||
silan \
|
||||
icecast \
|
||||
python-pip \
|
||||
selinux-policy \
|
||||
policycoreutils-python \
|
||||
python-celery
|
||||
|
||||
# for pip ssl install
|
||||
yum install -y \
|
||||
python-devel \
|
||||
python-lxml \
|
||||
openssl-devel
|
||||
|
||||
|
||||
|
||||
# SELinux Setup
|
||||
setsebool -P httpd_can_network_connect 1
|
||||
setsebool -P httpd_can_network_connect_db 1
|
||||
setsebool -P httpd_execmem on # needed by liquidsoap to do stuff when called by php
|
||||
setsebool -P httpd_use_nfs 1 # to get nfs mounted /vagrant
|
||||
setsebool -P git_system_use_nfs 1 # same for git
|
||||
|
||||
semanage port -a -t http_port_t -p tcp 9080 # default vagrant web port
|
||||
|
||||
# Allow apache full access to /vagrant and /etc/airtime
|
||||
semanage fcontext -a -t httpd_sys_rw_content_t "/vagrant(/.*)?"
|
||||
semanage fcontext -a -t httpd_sys_rw_content_t "/etc/airtime(/.*)?"
|
||||
semanage fcontext -a -t httpd_sys_rw_content_t "/srv/airtime(/.*)?"
|
||||
|
||||
restorecon -Rv /vagrant /etc/airtime /srv/airtime
|
||||
|
||||
# Disable default apache page
|
||||
sed -i -e 's/^/#/' /etc/httpd/conf.d/welcome.conf
|
||||
|
||||
# Quick and dirty systemd unit install (will be in package later)
|
||||
unit_dir="/etc/systemd/system"
|
||||
unit_src_dir="/vagrant/installer/systemd"
|
||||
cp -rp ${unit_src_dir}/*.service ${unit_dir}
|
||||
|
||||
# Overrides to use apache user for now (final packaging will have dedicated users)
|
||||
for service in `ls ${unit_src_dir}/*.service`; do
|
||||
unit_name=`basename ${service}`
|
||||
if [ "$unit_name" = "airtime-celery.service" ]; then
|
||||
continue
|
||||
fi
|
||||
sed -i \
|
||||
-e 's/User=.*/User=apache/' \
|
||||
-e 's/Group=.*/Group=apache/' \
|
||||
${unit_dir}/${unit_name}
|
||||
done
|
||||
|
||||
|
||||
# for good measure, lets reload em
|
||||
systemctl daemon-reload
|
||||
|
||||
# celery will not run unless we install a specific version (https://github.com/pypa/setuptools/issues/942)
|
||||
# this will need to be figured out later on and will get overriden by the docs installer anyhow :(
|
||||
pip install setuptools==33.1.1
|
||||
pip freeze setuptools==33.1.1
|
||||
|
||||
# the web will fail badly if this is not set, using my personal default just because
|
||||
echo 'date.timezone=Europe/Zurich' >> /etc/php.d/timezone.ini
|
||||
systemctl restart httpd
|
||||
|
||||
# icecast needs to be available to everyone
|
||||
sed -i -e 's@<bind-address>127.0.0.1</bind-address>@<bind-address>0.0.0.0</bind-address>@' /etc/icecast.xml
|
||||
systemctl enable --now icecast
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
#!/bin/bash
|
||||
|
||||
DEBIAN_FRONTEND=noninteractive apt-get -y -m --force-yes install alsa-utils
|
||||
usermod -a -G audio vagrant
|
||||
usermod -a -G audio www-data
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
#!/bin/bash
|
||||
|
||||
# Install modern alsa module for snd-hda-intel
|
||||
# slightly modernized from https://github.com/naomiaro/vagrant-alsa-audio
|
||||
# https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS
|
||||
alsa_deb="oem-audio-hda-daily-dkms_0.201703070301~ubuntu14.04.1_all.deb"
|
||||
wget -nv https://code.launchpad.net/~ubuntu-audio-dev/+archive/ubuntu/alsa-daily/+files/${alsa_deb}
|
||||
dpkg -i ${alsa_deb}
|
||||
rm ${alsa_deb}
|
||||
DEBIAN_FRONTEND=noninteractive apt-get -y -m --force-yes install alsa
|
||||
|
||||
usermod -a -G audio vagrant
|
||||
# liquidsoap runs as apache
|
||||
usermod -a -G audio www-data
|
||||
|
||||
|
|
@ -31,18 +31,6 @@ def postinst():
|
|||
# permissions for the defaults config file
|
||||
os.chmod('/etc/init.d/airtime-celery', 0755)
|
||||
os.chmod('/etc/default/airtime-celery', 0640)
|
||||
# Make the airtime log directory group-writable
|
||||
os.chmod('/var/log/airtime', 0775)
|
||||
|
||||
# Create the Celery user
|
||||
call(['adduser', '--no-create-home', '--gecos', '', '--disabled-login', '--firstuid', '1', '--lastuid', '999', 'celery'])
|
||||
# Add celery to the www-data group
|
||||
call(['usermod', '-G', 'www-data', '-a', 'celery'])
|
||||
|
||||
print "Reloading initctl configuration"
|
||||
call(['initctl', 'reload-configuration'])
|
||||
print "Setting Celery to start on boot"
|
||||
call(['update-rc.d', 'airtime-celery', 'defaults'])
|
||||
print "Run \"sudo service airtime-celery restart\" now."
|
||||
|
||||
setup(name='airtime-celery',
|
||||
|
|
|
|||
|
|
@ -0,0 +1,78 @@
|
|||
#!/bin/bash
|
||||
|
||||
### BEGIN INIT INFO
|
||||
# Provides: airtime_analyzer
|
||||
# Required-Start: $local_fs $remote_fs $network $syslog $all
|
||||
# Required-Stop: $local_fs $remote_fs $network $syslog
|
||||
# Default-Start: 2 3 4 5
|
||||
# Default-Stop: 0 1 6
|
||||
# Short-Description: Manage airtime_analyzer daemon
|
||||
### END INIT INFO
|
||||
|
||||
USERID=www-data
|
||||
GROUPID=www-data
|
||||
NAME=airtime_analyzer
|
||||
|
||||
DAEMON=/usr/bin/$NAME
|
||||
PIDFILE=/var/run/$NAME.pid
|
||||
|
||||
# Exit if the package is not installed
|
||||
[ -x "$DAEMON" ] || exit 0
|
||||
|
||||
# Read configuration variable file if it is present
|
||||
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
|
||||
|
||||
# Load the VERBOSE setting and other rcS variables
|
||||
. /lib/init/vars.sh
|
||||
|
||||
# Define LSB log_* functions.
|
||||
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
|
||||
# and status_of_proc is working.
|
||||
. /lib/lsb/init-functions
|
||||
|
||||
start () {
|
||||
start-stop-daemon --start --background --quiet --chuid $USERID:$GROUPID \
|
||||
--make-pidfile --pidfile $PIDFILE --startas $DAEMON
|
||||
}
|
||||
|
||||
stop () {
|
||||
# Send TERM after 5 seconds, wait at most 30 seconds.
|
||||
start-stop-daemon --stop --oknodo --retry TERM/5/0/30 --quiet --pidfile $PIDFILE
|
||||
rm -f $PIDFILE
|
||||
}
|
||||
|
||||
case "${1:-''}" in
|
||||
'start')
|
||||
# start commands here
|
||||
echo -n "Starting $NAME: "
|
||||
start
|
||||
echo "Done."
|
||||
;;
|
||||
'stop')
|
||||
# stop commands here
|
||||
echo -n "Stopping $NAME: "
|
||||
stop
|
||||
echo "Done."
|
||||
;;
|
||||
'restart')
|
||||
# restart commands here
|
||||
echo -n "Restarting $NAME: "
|
||||
stop
|
||||
start
|
||||
echo "Done."
|
||||
;;
|
||||
'force-reload')
|
||||
# reload commands here
|
||||
echo -n "Reloading $NAME: "
|
||||
stop
|
||||
start
|
||||
echo "Done."
|
||||
;;
|
||||
'status')
|
||||
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
|
||||
;;
|
||||
*) # no parameter specified
|
||||
echo "Usage: $SELF start|stop|restart|status"
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
|
|
@ -14,7 +14,8 @@ if '--no-init-script' in sys.argv:
|
|||
data_files = []
|
||||
sys.argv.remove('--no-init-script') # super hax
|
||||
else:
|
||||
data_files = [('/etc/init', ['install/upstart/airtime_analyzer.conf'])]
|
||||
data_files = [('/etc/init', ['install/upstart/airtime_analyzer.conf']),
|
||||
('/etc/init.d', ['install/sysvinit/airtime_analyzer'])]
|
||||
print data_files
|
||||
|
||||
setup(name='airtime_analyzer',
|
||||
|
|
|
|||
Loading…
Reference in New Issue