diff --git a/campcaster/bin/dist.sh b/campcaster/bin/dist.sh index 6fcc76cda..4bc539e4a 100755 --- a/campcaster/bin/dist.sh +++ b/campcaster/bin/dist.sh @@ -164,6 +164,10 @@ taglib_dir=$toolsdir/taglib taglib_version=taglib-1.4 taglib_tmpdir=$tools_tmpdir/taglib +libserial_dir=$toolsdir/libserial +libserial_version=libserial-0.5.2 +libserial_tmpdir=$tools_tmpdir/libserial + pear_dir=$toolsdir/pear pear_tmpdir=$tools_tmpdir/pear @@ -254,6 +258,9 @@ cp -pPR $gstreamer_dir/$gstreamer_version $gstreamer_tmpdir mkdir -p $taglib_tmpdir cp -pPR $taglib_dir/$taglib_version $taglib_tmpdir +mkdir -p $libserial_tmpdir +cp -pPR $libserial_dir/$libserial_version $libserial_tmpdir + mkdir -p $pear_tmpdir cp -pPR $pear_dir/* $pear_tmpdir diff --git a/campcaster/etc/Makefile.in b/campcaster/etc/Makefile.in index 067788723..c1040ce14 100644 --- a/campcaster/etc/Makefile.in +++ b/campcaster/etc/Makefile.in @@ -111,6 +111,8 @@ GSTREAMER_DIR = ${TOOLS_DIR}/gstreamer GSTREAMER_VERSION = gstreamer-0.8.12 TAGLIB_DIR = ${TOOLS_DIR}/taglib TAGLIB_VERSION = taglib-1.4 +LIBSERIAL_DIR = ${TOOLS_DIR}/libserial +LIBSERIAL_VERSION = libserial-0.5.2 PEAR_DIR = ${TOOLS_DIR}/pear MODULES_DIR = ${SRC_DIR}/modules @@ -219,6 +221,9 @@ ${TMP_DIR}/tools_setup.stamp: cd ${TAGLIB_DIR}/${TAGLIB_VERSION} && ./configure --prefix=${prefix} ${MAKE} -C ${TAGLIB_DIR}/${TAGLIB_VERSION} install + cd ${LIBSERIAL_DIR}/${LIBSERIAL_VERSION} && ./configure --prefix=${prefix} + ${MAKE} -C ${LIBSERIAL_DIR}/${LIBSERIAL_VERSION} install + cd ${PEAR_DIR} && ./configure --prefix=${prefix} ${MAKE} -C ${PEAR_DIR} install @@ -230,6 +235,7 @@ tools_distclean: -${MAKE} -C ${XMLRPCXX_DIR}/${XMLRPCXX_VERSION} distclean -${MAKE} -C ${GSTREAMER_DIR}/${GSTREAMER_VERSION} distclean -${MAKE} -C ${TAGLIB_DIR}/${TAGLIB_VERSION} distclean + -${MAKE} -C ${LIBSERIAL_DIR}/${LIBSERIAL_VERSION} distclean ${RM} ${TMP_DIR}/tools_setup.stamp doxytag_setup: ${TMP_DIR}/doxytag_setup.stamp diff --git a/campcaster/etc/configure.ac b/campcaster/etc/configure.ac index 7d0346f4f..84f543e4e 100644 --- a/campcaster/etc/configure.ac +++ b/campcaster/etc/configure.ac @@ -364,6 +364,7 @@ by Campcaster: libodbc++ 0.2.3 taglib 1.4 xmlrpc++ 2004-07-13 + libstream 0.5.2 using the following configuration settings: diff --git a/campcaster/src/tools/libserial/libserial-0.5.2/bin/autogen.sh b/campcaster/src/tools/libserial/libserial-0.5.2/bin/autogen.sh new file mode 100755 index 000000000..911f86819 --- /dev/null +++ b/campcaster/src/tools/libserial/libserial-0.5.2/bin/autogen.sh @@ -0,0 +1,95 @@ +#!/bin/bash +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the Campcaster project. +# http://campcaster.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# Campcaster is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# Campcaster is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with Campcaster; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author$ +# Version : $Revision$ +# Location : $URL$ +#------------------------------------------------------------------------------- + +#------------------------------------------------------------------------------- +# Run this to set up the build system: configure, makefiles, etc. +# (based on the version in enlightenment's cvs) +#------------------------------------------------------------------------------- + +package="libserial" + +# assume we're in $basedir/bin +reldir=`dirname $0`/.. +basedir=`cd $reldir; pwd;` +test -z "$basedir" && basedir=. +usrdir=`cd $basedir/../../../../usr; pwd;` + +bindir=$basedir/bin +etcdir=$basedir/etc +tmpdir=$basedir/tmp + +cd "$tmpdir" +DIE=0 + +(autoheader --version) < /dev/null > /dev/null 2>&1 || { + echo + echo "You must have autoconf installed to compile $package." + echo "Download the appropriate package for your distribution," + echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/" + DIE=1 +} + +(autoconf --version) < /dev/null > /dev/null 2>&1 || { + echo + echo "You must have autoconf installed to compile $package." + echo "Download the appropriate package for your distribution," + echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/" + DIE=1 +} + +if test "$DIE" -eq 1; then + exit 1 +fi + +if test -z "$*"; then + echo "I am going to run ./configure with no arguments - if you wish " + echo "to pass any to it, please specify them on the $0 command line." +fi + +echo "Generating configuration files for $package, please wait...." + +configure_ac=${etcdir}/configure.ac +configure=${tmpdir}/configure +aclocal_m4=${tmpdir}/aclocal.m4 + +# copy over configure.ac and acinlclude.m4 from etc to tmp, +# as aclocal >= 1.8 is sooo unbelivably stupid that it will simply try to +# look for configure.ac in the current directory, and include acinclude.m4 +# in aclocal.m4 it without a directory path in front +#ACLOCAL_FLAGS="-I ${tmpdir} --acdir=${tmpdir} --output=${aclocal_m4}" +#echo " aclocal $ACLOCAL_FLAGS" +#cp -f ${configure_ac} ${tmpdir} +#cp -f ${etcdir}/acinclude.m4 ${tmpdir} +#aclocal $ACLOCAL_FLAGS + +#echo " autoheader ${configure_ac}" +#autoheader ${configure_ac} + +echo " autoconf -I ${tmpdir} -o ${configure} ${configure_ac}" +autoconf -I ${tmpdir} -o ${configure} ${configure_ac} + diff --git a/campcaster/src/tools/libserial/libserial-0.5.2/bin/install-sh b/campcaster/src/tools/libserial/libserial-0.5.2/bin/install-sh new file mode 100755 index 000000000..387b7d18f --- /dev/null +++ b/campcaster/src/tools/libserial/libserial-0.5.2/bin/install-sh @@ -0,0 +1,323 @@ +#!/bin/bash +# install - install a program, script, or datafile + +scriptversion=2005-02-02.21 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +chmodcmd="$chmodprog 0755" +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + shift + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit 1; } +done + +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit 0 +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/campcaster/src/tools/libserial/libserial-0.5.2/bin/prepare.sh b/campcaster/src/tools/libserial/libserial-0.5.2/bin/prepare.sh new file mode 100755 index 000000000..f50d5d7c6 --- /dev/null +++ b/campcaster/src/tools/libserial/libserial-0.5.2/bin/prepare.sh @@ -0,0 +1,53 @@ +#!/bin/bash +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the Campcaster project. +# http://campcaster.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# Campcaster is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# Campcaster is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with Campcaster; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author$ +# Version : $Revision$ +# Location : $URL$ +#------------------------------------------------------------------------------- +#------------------------------------------------------------------------------- +# Run this script to prepare libserial to be configured and compiled. +# For more information on libserial, see http://libserial.sourceforge.net/ +#------------------------------------------------------------------------------- +product=libserial-0.5.2 + +reldir=`dirname $0`/.. +basedir=`cd ${reldir}; pwd;` +bindir=${basedir}/bin +etcdir=${basedir}/etc +tmpdir=${basedir}/tmp + +tar=$basedir/src/$product.tar.gz + +mkdir -p ${tmpdir} + +# copy over install-sh, as AC_CONFIG_SUBDIRS will be looking for it +cp -r $bindir/install-sh $tmpdir + +cd ${tmpdir} +if [ ! -d $product ]; then + tar xfz ${tar} + cd $product + # put patches here +fi + diff --git a/campcaster/src/tools/libserial/libserial-0.5.2/configure b/campcaster/src/tools/libserial/libserial-0.5.2/configure new file mode 100755 index 000000000..03e54b0b4 --- /dev/null +++ b/campcaster/src/tools/libserial/libserial-0.5.2/configure @@ -0,0 +1,52 @@ +#!/bin/sh +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the Campcaster project. +# http://campcaster.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# Campcaster is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# Campcaster is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with Campcaster; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author$ +# Version : $Revision$ +# Location : $URL$ +#------------------------------------------------------------------------------- + +#------------------------------------------------------------------------------- +# Run this script to configure the environment. +# +# This script in effect calls the real automake / autoconf configure script +#------------------------------------------------------------------------------- + +# assume we're in $basedir +reldir=`dirname $0` +basedir=`cd $reldir; pwd;` +test -z "$basedir" && basedir=. + +bindir=$basedir/bin +tmpdir=$basedir/tmp + + +autogen=$bindir/autogen.sh +configure=$tmpdir/configure + +if [ ! -x $configure ]; then + (cd $basedir && $autogen $*) +fi + +(cd $tmpdir && $configure $*) + diff --git a/campcaster/src/tools/libserial/libserial-0.5.2/etc/Makefile.in b/campcaster/src/tools/libserial/libserial-0.5.2/etc/Makefile.in new file mode 100644 index 000000000..0fa74d69f --- /dev/null +++ b/campcaster/src/tools/libserial/libserial-0.5.2/etc/Makefile.in @@ -0,0 +1,85 @@ +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the Campcaster project. +# http://campcaster.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# Campcaster is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# Campcaster is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with Campcaster; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author$ +# Version : $Revision$ +# Location : $URL$ +#------------------------------------------------------------------------------- + +#------------------------------------------------------------------------------- +# General command definitions +#------------------------------------------------------------------------------- +MKDIR = mkdir -p +RM = rm -f +RMDIR = rm -rf +DOXYGEN = doxygen +DOXYTAG = doxytag +XSLTPROC = xsltproc +ECHO = @echo +FLAWFINDER = flawfinder + + +#------------------------------------------------------------------------------- +# Basic directory and file definitions +#------------------------------------------------------------------------------- +BASE_DIR = . +BIN_DIR = ${BASE_DIR}/bin +DOC_DIR = ${BASE_DIR}/doc +DOXYGEN_DIR = ${DOC_DIR}/doxygen +COVERAGE_DIR = ${DOC_DIR}/coverage +ETC_DIR = ${BASE_DIR}/etc +TMP_DIR = ${BASE_DIR}/tmp + +LIBSERIAL_VERSION = libserial-0.5.2 +LIBSERIAL_DIR = ${TMP_DIR}/${LIBSERIAL_VERSION} + +prefix = @prefix@ +# datadir will be defiend as ${prefix}/share, so we need to define ${prefix} +# above +docdir = @datadir@/doc/${LIBSERIAL_VERSION} + + +#------------------------------------------------------------------------------- +# Targets +#------------------------------------------------------------------------------- +all: ${TMP_DIR}/all.stamp +${TMP_DIR}/all.stamp: + ${MAKE} -C ${LIBSERIAL_DIR} + ${MAKE} -C ${LIBSERIAL_DIR} docs + touch ${TMP_DIR}/all.stamp + +install: all ${TMP_DIR}/install.stamp +${TMP_DIR}/install.stamp: + ${MAKE} -C ${LIBSERIAL_DIR} install + ${MKDIR} ${docdir} + cp -pPR ${LIBSERIAL_DIR}/doc/html ${docdir} + touch ${TMP_DIR}/install.stamp + +clean: + ${MAKE} -C ${LIBSERIAL_DIR} clean + ${RM} ${TMP_DIR}/*.stamp + +distclean: + ${RM} ${TMP_DIR}/*.stamp + ${RMDIR} ${LIBSERIAL_DIR} + ${RMDIR} ${TMP_DIR}/auto* ${TMP_DIR}/config* ${TMP_DIR}/install-sh + diff --git a/campcaster/src/tools/libserial/libserial-0.5.2/etc/configure.ac b/campcaster/src/tools/libserial/libserial-0.5.2/etc/configure.ac new file mode 100644 index 000000000..a76b50d4d --- /dev/null +++ b/campcaster/src/tools/libserial/libserial-0.5.2/etc/configure.ac @@ -0,0 +1,54 @@ +dnl----------------------------------------------------------------------------- +dnl Copyright (c) 2004 Media Development Loan Fund +dnl +dnl This file is part of the Campcaster project. +dnl http://campcaster.campware.org/ +dnl To report bugs, send an e-mail to bugs@campware.org +dnl +dnl Campcaster is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 2 of the License, or +dnl (at your option) any later version. +dnl +dnl Campcaster is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +dnl GNU General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with Campcaster; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +dnl +dnl +dnl Author : $Author$ +dnl Version : $Revision$ +dnl Location : $URL$ +dnl----------------------------------------------------------------------------- + +dnl----------------------------------------------------------------------------- +dnl NOTE: Run all configure related scripts from the tmp directory of the +dnl project. +dnl This is due to the fact that configure spreads a lot of trash around, +dnl like atom4te cache directories, config.* files, etc. into the directory +dnl it is being run from. We clearly don't want these in our base directory. +dnl----------------------------------------------------------------------------- +AC_INIT(libserial, 0.5.2, bugs@campware.org) +AC_PREREQ(2.59) +AC_COPYRIGHT([Copyright (c) 2004 Media Development Loan Fund under the GNU GPL]) +AC_REVISION($Revision$) + +AC_CONFIG_SRCDIR(../src/libserial-0.5.2.tar.gz) + + +dnl untar the sources before anything happens +../bin/prepare.sh + +cd ../tmp/libserial-0.5.2 +./configure --prefix=$prefix +cd - + + +AC_CONFIG_FILES(../Makefile:../etc/Makefile.in) + +AC_OUTPUT() + diff --git a/campcaster/src/tools/libserial/libserial-0.5.2/src/libserial-0.5.2.tar.gz b/campcaster/src/tools/libserial/libserial-0.5.2/src/libserial-0.5.2.tar.gz new file mode 100644 index 000000000..4c4e0843d Binary files /dev/null and b/campcaster/src/tools/libserial/libserial-0.5.2/src/libserial-0.5.2.tar.gz differ