From 46d249a1a1633eef5609111ce4245e5d55c8b001 Mon Sep 17 00:00:00 2001 From: maroy Date: Tue, 16 Nov 2004 14:16:42 +0000 Subject: [PATCH] added Hello, World! minimal implementation of the GUI just as a start... --- .../products/gLiveSupport/bin/autogen.sh | 87 ++ .../gLiveSupport/bin/gen_coverage_data.sh | 80 ++ livesupport/products/gLiveSupport/doc/.keepme | 1 + .../products/gLiveSupport/etc/Makefile.in | 190 +++ .../products/gLiveSupport/etc/configure.ac | 67 + .../products/gLiveSupport/etc/doxygen.config | 1145 +++++++++++++++++ livesupport/products/gLiveSupport/lib/.keepme | 1 + .../products/gLiveSupport/src/HelloWorld.cxx | 95 ++ .../products/gLiveSupport/src/HelloWorld.h | 103 ++ .../products/gLiveSupport/src/main.cxx | 74 ++ livesupport/products/gLiveSupport/tmp/.keepme | 1 + 11 files changed, 1844 insertions(+) create mode 100755 livesupport/products/gLiveSupport/bin/autogen.sh create mode 100755 livesupport/products/gLiveSupport/bin/gen_coverage_data.sh create mode 100644 livesupport/products/gLiveSupport/doc/.keepme create mode 100644 livesupport/products/gLiveSupport/etc/Makefile.in create mode 100644 livesupport/products/gLiveSupport/etc/configure.ac create mode 100644 livesupport/products/gLiveSupport/etc/doxygen.config create mode 100644 livesupport/products/gLiveSupport/lib/.keepme create mode 100644 livesupport/products/gLiveSupport/src/HelloWorld.cxx create mode 100644 livesupport/products/gLiveSupport/src/HelloWorld.h create mode 100644 livesupport/products/gLiveSupport/src/main.cxx create mode 100644 livesupport/products/gLiveSupport/tmp/.keepme diff --git a/livesupport/products/gLiveSupport/bin/autogen.sh b/livesupport/products/gLiveSupport/bin/autogen.sh new file mode 100755 index 000000000..49cb6da76 --- /dev/null +++ b/livesupport/products/gLiveSupport/bin/autogen.sh @@ -0,0 +1,87 @@ +#!/bin/sh +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the LiveSupport project. +# http://livesupport.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# LiveSupport is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# LiveSupport is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with LiveSupport; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author: maroy $ +# Version : $Revision: 1.1 $ +# Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/bin/autogen.sh,v $ +#------------------------------------------------------------------------------- + +#------------------------------------------------------------------------------- +# Run this to set up the build system: configure, makefiles, etc. +# (based on the version in enlightenment's cvs) +#------------------------------------------------------------------------------- + +package="gLiveSupport" + +# assume we're in $basedir/bin +basedir=`dirname $0`/.. +test -z "$basedir" && basedir=. + +tmpdir=$basedir/tmp + +cd "$tmpdir" +DIE=0 + +# look at all other directories as seen from ${basedir}/tmp +tmpdir=. +bindir=../bin +etcdir=../etc + +(autoheader --version) < /dev/null > /dev/null 2>&1 || { + echo + echo "You must have autoconf installed to compile $package." + echo "Download the appropriate package for your distribution," + echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/" + DIE=1 +} + +(autoconf --version) < /dev/null > /dev/null 2>&1 || { + echo + echo "You must have autoconf installed to compile $package." + echo "Download the appropriate package for your distribution," + echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/" + DIE=1 +} + +if test "$DIE" -eq 1; then + exit 1 +fi + +if test -z "$*"; then + echo "I am going to run ./configure with no arguments - if you wish " + echo "to pass any to it, please specify them on the $0 command line." +fi + +echo "Generating configuration files for $package, please wait...." + +configure_ac=${etcdir}/configure.ac +configure=${tmpdir}/configure + +#echo " aclocal $ACLOCAL_FLAGS" +#aclocal $ACLOCAL_FLAGS +echo " autoheader ${configure_ac}" +autoheader ${configure_ac} +echo " autoconf -o ${configure} ${configure_ac}" +autoconf -o ${configure} ${configure_ac} + +${configure} "$@" && echo diff --git a/livesupport/products/gLiveSupport/bin/gen_coverage_data.sh b/livesupport/products/gLiveSupport/bin/gen_coverage_data.sh new file mode 100755 index 000000000..e3cd95cfa --- /dev/null +++ b/livesupport/products/gLiveSupport/bin/gen_coverage_data.sh @@ -0,0 +1,80 @@ +#!/bin/sh +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the LiveSupport project. +# http://livesupport.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# LiveSupport is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# LiveSupport is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with LiveSupport; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author: maroy $ +# Version : $Revision: 1.1 $ +# Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/bin/gen_coverage_data.sh,v $ +#------------------------------------------------------------------------------- +#------------------------------------------------------------------------------- +# This script generates code coverage data for the module +#------------------------------------------------------------------------------- +module="LiveSupport GUI" + +reldir=`dirname $0`/.. +basedir=`cd $reldir; pwd; cd -` +bindir=$basedir/bin +docdir=$basedir/doc +tmpdir=$basedir/tmp + +usrdir=`cd $basedir/../../usr; pwd; cd -` + +coverage_report_dir=$docdir/coverage + +raw_coverage_file=$tmpdir/raw_coverage.info +coverage_file=$tmpdir/coverage.info + +lcov=$usrdir/bin/lcov +genhtml=$usrdir/bin/genhtml + + +cd $basedir + +#------------------------------------------------------------------------------- +# Re-configure with covarege collection enabled, compile and run the tests +#------------------------------------------------------------------------------- +$bindir/autogen.sh --enable-coverage +make clean +make check + +#------------------------------------------------------------------------------- +# Generate some symlinks so that the sources are visible from tmpdir +#------------------------------------------------------------------------------- +ln -s $basedir/include $tmpdir/include +ln -s $basedir/src $tmpdir/src + + +#------------------------------------------------------------------------------- +# Use lcov to generate an HTML report on the coverage data +#------------------------------------------------------------------------------- +$lcov -d $tmpdir -c > $raw_coverage_file +$lcov -e $raw_coverage_file "$tmpdir/*" > $coverage_file +rm -rf $coverage_report_dir +mkdir -p $coverage_report_dir +$genhtml -t "$module" -o $coverage_report_dir $coverage_file + + +#------------------------------------------------------------------------------- +# Clean up +#------------------------------------------------------------------------------- +rm -f $tmpdir/include +rm -f $tmpdir/src diff --git a/livesupport/products/gLiveSupport/doc/.keepme b/livesupport/products/gLiveSupport/doc/.keepme new file mode 100644 index 000000000..e0808fa16 --- /dev/null +++ b/livesupport/products/gLiveSupport/doc/.keepme @@ -0,0 +1 @@ +keep me diff --git a/livesupport/products/gLiveSupport/etc/Makefile.in b/livesupport/products/gLiveSupport/etc/Makefile.in new file mode 100644 index 000000000..be8c4ef9a --- /dev/null +++ b/livesupport/products/gLiveSupport/etc/Makefile.in @@ -0,0 +1,190 @@ +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the LiveSupport project. +# http://livesupport.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# LiveSupport is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# LiveSupport is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with LiveSupport; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author: maroy $ +# Version : $Revision: 1.1 $ +# Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/etc/Makefile.in,v $ +# +# @configure_input@ +#------------------------------------------------------------------------------- + +#------------------------------------------------------------------------------- +# General command definitions +#------------------------------------------------------------------------------- +MKDIR = mkdir -p +RM = rm -f +RMDIR = rm -rf +DOXYGEN = doxygen + +#------------------------------------------------------------------------------- +# Basic directory and file definitions +#------------------------------------------------------------------------------- +BASE_DIR = @builddir@ +DOC_DIR = ${BASE_DIR}/doc +DOXYGEN_DIR = ${DOC_DIR}/doxygen +COVERAGE_DIR = ${DOC_DIR}/coverage +ETC_DIR = ${BASE_DIR}/etc +SRC_DIR = ${BASE_DIR}/src +TMP_DIR = ${BASE_DIR}/tmp + +USR_DIR = ${BASE_DIR}/../../usr +USR_INCLUDE_DIR = ${USR_DIR}/include +USR_LIB_DIR = ${USR_DIR}/lib +BOOST_INCLUDE_DIR = ${USR_INCLUDE_DIR}/boost-1_31 +LIBXMLPP_INCLUDE_DIR = ${USR_INCLUDE_DIR}/libxml++-1.0 + +VPATH = ${SRC_DIR} + +MODULES_DIR = ${BASE_DIR}/../../modules + +CORE_DIR = ${MODULES_DIR}/core +CORE_INCLUDE_DIR = ${CORE_DIR}/include +CORE_LIB_DIR = ${CORE_DIR}/lib +CORE_LIB = livesupport_core +CORE_LIB_FILE = ${CORE_LIB_DIR}/lib${CORE_LIB}.a + +STORAGE_DIR = ${MODULES_DIR}/storage +STORAGE_INCLUDE_DIR = ${STORAGE_DIR}/include +STORAGE_LIB_DIR = ${STORAGE_DIR}/lib +STORAGE_LIB = livesupport_storage +STORAGE_LIB_FILE = ${STORAGE_LIB_DIR}/lib${STORAGE_LIB}.a + +GTKMM_CFLAGS=`pkg-config gtkmm-2.0 --cflags` +GTKMM_LIBS=`pkg-config gtkmm-2.0 --libs` + +TEST_RESULTS = ${DOC_DIR}/testResults.xml +# the text result XSLT has to be relative to the test result file, e.g. TMP_DIR +TEST_XSLT = ../etc/testResultToHtml.xsl + +G_LIVESUPPORT_EXE = ${TMP_DIR}/gLiveSupport +G_LIVESUPPORT_CFG = ${ETC_DIR}/gLiveSupport.xml +TEST_RUNNER = ${TMP_DIR}/testRunner + +DOXYGEN_CONFIG = ${ETC_DIR}/doxygen.config + + +#------------------------------------------------------------------------------- +# Configuration parameters +#------------------------------------------------------------------------------- +CPPFLAGS = @CPPFLAGS@ +CXXFLAGS = @CXXFLAGS@ @DEFS@ @COVERAGE_CXXFLAGS@ \ + -pedantic -Wall -Wno-long-long \ + ${GTKMM_CFLAGS} \ + -I${USR_INCLUDE_DIR} \ + -I${BOOST_INCLUDE_DIR} \ + -I${LIBXMLPP_INCLUDE_DIR} \ + -I${CORE_INCLUDE_DIR} \ + -I${STORAGE_INCLUDE_DIR} \ + -I${TMP_DIR} +LDFLAGS = @LDFLAGS@ -L${USR_LIB_DIR} \ + -L${CORE_LIB_DIR} \ + -L${STORAGE_LIB_DIR} + + +#------------------------------------------------------------------------------- +# Dependencies +#------------------------------------------------------------------------------- +G_LIVESUPPORT_OBJS = ${TMP_DIR}/HelloWorld.o + + +G_LIVESUPPORT_EXE_OBJS = ${G_LIVESUPPORT_OBJS} \ + ${TMP_DIR}/main.o +G_LIVESUPPORT_EXE_LIBS = -l${STORAGE_LIB} -l${CORE_LIB} \ + ${GTKMM_LIBS} \ + -lboost_date_time-gcc \ + -lxmlrpc++ -lssl -lxml++-1.0 + +TEST_RUNNER_OBJS = ${G_LIVESUPPORT_OBJS} \ + ${TMP_DIR}/TestRunner.o +TEST_RUNNER_LIBS = ${G_LIVESUPPORT_EXE_LIBS} -lcppunit -ldl + + +#------------------------------------------------------------------------------- +# Targets +#------------------------------------------------------------------------------- +.PHONY: all dir_setup doc clean docclean depclean distclean +.PHONY: install start run_tests stop uninstall + +all: dir_setup ${G_LIVESUPPORT_EXE} + +dir_setup: ${TMP_DIR} ${DOXYGEN_DIR} + +doc: + ${DOXYGEN} ${DOXYGEN_CONFIG} + +clean: + ${RM} ${G_LIVESUPPORT_EXE_OBJS} ${G_LIVESUPPORT_EXE} + ${RM} ${TEST_RUNNER_OBJS} ${TEST_RUNNER} + ${RM} ${TMP_DIR}/*.bb ${TMP_DIR}/*.bbg ${TMP_DIR}/*.da ${TMP_DIR}/*.info + +docclean: + ${RMDIR} ${DOXYGEN_DIR}/html + ${RMDIR} ${COVERAGE_DIR}/* + ${RM} ${TEST_RESULTS} + +depclean: clean + ${MAKE} -C ${STORAGE_DIR} clean + ${MAKE} -C ${CORE_DIR} clean + +distclean: clean docclean + ${RMDIR} ${TMP_DIR}/config* ${TMP_DIR}/autom4te* + +check: all ${TEST_RUNNER} run_tests + +run_tests: ${TEST_RUNNER} + LD_LIBRARY_PATH=${USR_LIB_DIR} ${TEST_RUNNER} \ + -o ${TEST_RESULTS} -s ${TEST_XSLT} + +run: ${G_LIVESUPPORT_EXE} + LD_LIBRARY_PATH=${USR_LIB_DIR} ${G_LIVESUPPORT_EXE} + + +#------------------------------------------------------------------------------- +# Specific targets +#------------------------------------------------------------------------------- +${G_LIVESUPPORT_EXE}: ${CORE_LIB_FILE} ${STORAGE_LIB_FILE} \ + ${G_LIVESUPPORT_EXE_OBJS} + ${CXX} ${LDFLAGS} -o $@ $^ ${G_LIVESUPPORT_EXE_LIBS} + +${TMP_DIR}: + ${MKDIR} ${TMP_DIR} + +${DOXYGEN_DIR}: + ${MKDIR} ${DOXYGEN_DIR} + +${TEST_RUNNER}: ${CORE_LIB_FILE} ${STORAGE_LIB_FILE} \ + ${TEST_RUNNER_OBJS} + ${CXX} ${LDFLAGS} -o $@ ${TEST_RUNNER_OBJS} ${TEST_RUNNER_LIBS} + +${CORE_LIB_FILE}: + ${MAKE} -C ${CORE_DIR} + +${STORAGE_LIB_FILE}: + ${MAKE} -C ${STORAGE_DIR} + + +#------------------------------------------------------------------------------- +# Pattern rules +#------------------------------------------------------------------------------- +${TMP_DIR}/%.o : ${SRC_DIR}/%.cxx + ${CXX} ${CPPFLAGS} ${CXXFLAGS} -c -o $@ $< + diff --git a/livesupport/products/gLiveSupport/etc/configure.ac b/livesupport/products/gLiveSupport/etc/configure.ac new file mode 100644 index 000000000..736ccdcf2 --- /dev/null +++ b/livesupport/products/gLiveSupport/etc/configure.ac @@ -0,0 +1,67 @@ +dnl----------------------------------------------------------------------------- +dnl Copyright (c) 2004 Media Development Loan Fund +dnl +dnl This file is part of the LiveSupport project. +dnl http://livesupport.campware.org/ +dnl To report bugs, send an e-mail to bugs@campware.org +dnl +dnl LiveSupport is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 2 of the License, or +dnl (at your option) any later version. +dnl +dnl LiveSupport is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +dnl GNU General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with LiveSupport; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +dnl +dnl +dnl Author : $Author: maroy $ +dnl Version : $Revision: 1.1 $ +dnl Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/etc/configure.ac,v $ +dnl----------------------------------------------------------------------------- + +dnl----------------------------------------------------------------------------- +dnl NOTE: Run all configure related scripts from the tmp directory of the +dnl project. +dnl This is due to the fact that configure spreads a lot of trash around, +dnl like atom4te cache directories, config.* files, etc. into the directory +dnl it is being run from. We clearly don't want these in our base directory. +dnl----------------------------------------------------------------------------- +AC_INIT(gLiveSupport, 0.1, bugs@campware.org) +AC_PREREQ(2.59) +AC_COPYRIGHT([Copyright (c) 2004 Media Development Loan Fund under the GNU GPL]) +AC_REVISION($Revision: 1.1 $) + +AC_CONFIG_SRCDIR(../src/main.cxx) + +AC_CONFIG_HEADERS(configure.h) +AC_PROG_CXX() + +AC_CHECK_HEADERS(sys/types.h unistd.h getopt.h signal.h sys/stat.h time.h) +AC_CHECK_HEADERS(stdio.h fcntl.h pthread.h sys/time.h) + +dnl----------------------------------------------------------------------------- +dnl enable compilaton for code coverage data +dnl----------------------------------------------------------------------------- +AC_SUBST(COVERAGE_CXXFLAGS) + +AC_ARG_ENABLE( coverage, +[ --enable-coverage enable code coverage data generaton (no) ], + ENABLE_COVERAGE=${enableval}, ENABLE_COVERAGE="no" ) + +if test "x${ENABLE_COVERAGE}" == "xyes" ; then + COVERAGE_CXXFLAGS="-fprofile-arcs -ftest-coverage" + AC_MSG_RESULT([compiling in code coverage mode]) +else + AC_MSG_RESULT([not compiling in code coverage mode]) +fi + + +AC_CONFIG_FILES(../Makefile:../etc/Makefile.in) + +AC_OUTPUT() diff --git a/livesupport/products/gLiveSupport/etc/doxygen.config b/livesupport/products/gLiveSupport/etc/doxygen.config new file mode 100644 index 000000000..0d6f6337f --- /dev/null +++ b/livesupport/products/gLiveSupport/etc/doxygen.config @@ -0,0 +1,1145 @@ +#------------------------------------------------------------------------------- +# Copyright (c) 2004 Media Development Loan Fund +# +# This file is part of the LiveSupport project. +# http://livesupport.campware.org/ +# To report bugs, send an e-mail to bugs@campware.org +# +# LiveSupport is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# LiveSupport is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with LiveSupport; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# Author : $Author: maroy $ +# Version : $Revision: 1.1 $ +# Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/etc/doxygen.config,v $ +#------------------------------------------------------------------------------- + +# Doxyfile 1.3.6 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = LiveSupport + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = 1.0 + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc/doxygen + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, +# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en +# (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese, +# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is used +# as the annotated text. Otherwise, the brief description is used as-is. If left +# blank, the following values are used ("$name" is automatically replaced with the +# name of the entity): "The $name class" "The $name widget" "The $name file" +# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited +# members of a class in the documentation of that class as if those members were +# ordinary class members. Constructors, destructors and assignment operators of +# the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. It is allowed to use relative paths in the argument list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = YES + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = YES + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = YES + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = src + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp +# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories +# that are symbolic links (a Unix filesystem feature) are excluded from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. + +INPUT_FILTER = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_PREDEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse the +# parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = \ +../../doc/doxygen/xmlrpc++.tag=../../../../../usr/share/doc/xmlrpc++ + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = YES + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or +# super classes. Setting the tag to NO turns the diagrams off. Note that this +# option is superseded by the HAVE_DOT option below. This is only a fallback. It is +# recommended to install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found on the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 1024 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes that +# lay further from the root node will be omitted. Note that setting this option to +# 1 or 2 may greatly reduce the computation time needed for large code bases. Also +# note that a graph may be further truncated if the graph's image dimensions are +# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). +# If 0 is used for the depth value (the default), the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/livesupport/products/gLiveSupport/lib/.keepme b/livesupport/products/gLiveSupport/lib/.keepme new file mode 100644 index 000000000..e0808fa16 --- /dev/null +++ b/livesupport/products/gLiveSupport/lib/.keepme @@ -0,0 +1 @@ +keep me diff --git a/livesupport/products/gLiveSupport/src/HelloWorld.cxx b/livesupport/products/gLiveSupport/src/HelloWorld.cxx new file mode 100644 index 000000000..9af734e17 --- /dev/null +++ b/livesupport/products/gLiveSupport/src/HelloWorld.cxx @@ -0,0 +1,95 @@ +/*------------------------------------------------------------------------------ + + Copyright (c) 2004 Media Development Loan Fund + + This file is part of the LiveSupport project. + http://livesupport.campware.org/ + To report bugs, send an e-mail to bugs@campware.org + + LiveSupport is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + LiveSupport is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with LiveSupport; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + + Author : $Author: maroy $ + Version : $Revision: 1.1 $ + Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/src/Attic/HelloWorld.cxx,v $ + +------------------------------------------------------------------------------*/ + +/* ============================================================ include files */ + +#ifdef HAVE_CONFIG_H +#include "configure.h" +#endif + +#include + +#include "HelloWorld.h" + + +using namespace LiveSupport::GLiveSupport; + +/* =================================================== local data structures */ + + +/* ================================================ local constants & macros */ + +/** + * The Hello, World! string + */ +static std::string helloWorld("Hello, World!"); + + +/* =============================================== local function prototypes */ + + +/* ============================================================= module code */ + +/*------------------------------------------------------------------------------ + * Constructor. + *----------------------------------------------------------------------------*/ +HelloWorld :: HelloWorld (void) throw () + : button(helloWorld) +{ + // Sets the border width of the window. + set_border_width(10); + + // Register the signal handler for the button getting clicked. + button.signal_clicked().connect(slot(*this, &HelloWorld::onButtonClicked)); + + // This packs the button into the Window (a container). + add(button); + + // The final step is to display this newly created widget... + button.show(); +} + + +/*------------------------------------------------------------------------------ + * Destructor. + *----------------------------------------------------------------------------*/ +HelloWorld :: ~HelloWorld (void) throw () +{ +} + + +/*------------------------------------------------------------------------------ + * Event handler for the button getting clicked. + *----------------------------------------------------------------------------*/ +void +HelloWorld :: onButtonClicked (void) throw () +{ + std::cout << helloWorld << std::endl; +} + diff --git a/livesupport/products/gLiveSupport/src/HelloWorld.h b/livesupport/products/gLiveSupport/src/HelloWorld.h new file mode 100644 index 000000000..458339fa1 --- /dev/null +++ b/livesupport/products/gLiveSupport/src/HelloWorld.h @@ -0,0 +1,103 @@ +/*------------------------------------------------------------------------------ + + Copyright (c) 2004 Media Development Loan Fund + + This file is part of the LiveSupport project. + http://livesupport.campware.org/ + To report bugs, send an e-mail to bugs@campware.org + + LiveSupport is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + LiveSupport is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with LiveSupport; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + + Author : $Author: maroy $ + Version : $Revision: 1.1 $ + Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/src/Attic/HelloWorld.h,v $ + +------------------------------------------------------------------------------*/ +#ifndef HelloWorld_h +#define HelloWorld_h + +#ifndef __cplusplus +#error This is a C++ include file +#endif + + +/* ============================================================ include files */ + +#ifdef HAVE_CONFIG_H +#include "configure.h" +#endif + +#include +#include + +namespace LiveSupport { +namespace GLiveSupport { + +/* ================================================================ constants */ + + +/* =================================================================== macros */ + + +/* =============================================================== data types */ + +/** + * A simple window, just saying "Hello, World!" + * + * @author $Author: maroy $ + * @version $Revision: 1.1 $ + */ +class HelloWorld : public Gtk::Window +{ + + protected: + /** + * The only button in the window. + */ + Gtk::Button button; + + /** + * Signal handler for the only button clicked. + */ + virtual void + onButtonClicked(void) throw (); + + + public: + /** + * Constructor. + */ + HelloWorld(void) throw (); + + /** + * Virtual destructor. + */ + virtual + ~HelloWorld(void) throw (); + +}; + +/* ================================================= external data structures */ + + +/* ====================================================== function prototypes */ + + +} // namespace GLiveSupport +} // namespace LiveSupport + +#endif // HelloWorld_h + diff --git a/livesupport/products/gLiveSupport/src/main.cxx b/livesupport/products/gLiveSupport/src/main.cxx new file mode 100644 index 000000000..b07ae275b --- /dev/null +++ b/livesupport/products/gLiveSupport/src/main.cxx @@ -0,0 +1,74 @@ +/*------------------------------------------------------------------------------ + + Copyright (c) 2004 Media Development Loan Fund + + This file is part of the LiveSupport project. + http://livesupport.campware.org/ + To report bugs, send an e-mail to bugs@campware.org + + LiveSupport is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + LiveSupport is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with LiveSupport; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + + Author : $Author: maroy $ + Version : $Revision: 1.1 $ + Location : $Source: /home/paul/cvs2svn-livesupport/newcvsrepo/livesupport/products/gLiveSupport/src/main.cxx,v $ + +------------------------------------------------------------------------------*/ + +/** @file + * This file contains the main entry point to the Scheduler daemon. + */ + +/* ============================================================ include files */ + +#ifdef HAVE_CONFIG_H +#include "configure.h" +#endif + +#include + +#include "HelloWorld.h" + +using namespace LiveSupport::GLiveSupport; + +/* =================================================== local data structures */ + + +/* ================================================ local constants & macros */ + + +/* =============================================== local function prototypes */ + +/* ============================================================= module code */ + +/** + * Program entry point. + * + * @param argc the number of command line arguments passed by the user. + * @param argv the command line arguments passed by the user. + * @return 0 on success, non-0 on failure. + */ +int main ( int argc, + char * argv[] ) +{ + Gtk::Main kit(argc, argv); + + HelloWorld helloworld; + // Shows the window and returns when it is closed. + Gtk::Main::run(helloworld); + + return 0; +} + diff --git a/livesupport/products/gLiveSupport/tmp/.keepme b/livesupport/products/gLiveSupport/tmp/.keepme new file mode 100644 index 000000000..e0808fa16 --- /dev/null +++ b/livesupport/products/gLiveSupport/tmp/.keepme @@ -0,0 +1 @@ +keep me