diff --git a/install_full/php5-fpm/airtime.conf b/install_full/php5-fpm/airtime.conf
new file mode 100644
index 000000000..ea396422f
--- /dev/null
+++ b/install_full/php5-fpm/airtime.conf
@@ -0,0 +1,251 @@
+# NGINX changes are contributed by Eugene MechanisM
+# Link to the post:
+# http://forum.sourcefabric.org/discussion/13563/first-step-to-run-airtime-via-nginx-based-on-airtime-2.0-beta-files
+
+; Start a new pool named 'airtime'.
+; the variable $pool can we used in any directive and will be replaced by the
+; pool name ('airtime' here)
+[airtime]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or /usr) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses on a
+;                            specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = '/var/run/airtime.php.sock'
+
+; Set listen(2) backlog. A value of '-1' means unlimited.
+; Default Value: 128 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = -1
+ 
+; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions. 
+; Default Values: user and group are set as the running user
+;                 mode is set to 0666
+;listen.owner = www-data
+;listen.group = www-data
+;listen.mode = 0666
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+;       will be used.
+user = www-data
+group = www-data
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives:
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes to be created when pm is set to 'dynamic'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI.
+; Note: Used when pm is set to either 'static' or 'dynamic'
+; Note: This value is mandatory.
+pm.max_children = 10
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+pm.start_servers = 4
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 2
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 6
+ 
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. By default, the status page shows the following
+; information:
+;   accepted conn        - the number of request accepted by the pool;
+;   pool                 - the name of the pool;
+;   process manager      - static or dynamic;
+;   idle processes       - the number of idle processes;
+;   active processes     - the number of active processes;
+;   total processes      - the number of idle + active processes.
+;   max children reached - number of times, the process limit has been reached,
+;                          when pm tries to start more children (works only for
+;                          pm 'dynamic')
+; The values of 'idle processes', 'active processes' and 'total processes' are
+; updated each second. The value of 'accepted conn' is updated in real time.
+; Example output:
+;   accepted conn:        12073
+;   pool:                 www
+;   process manager:      static
+;   idle processes:       35
+;   active processes:     65
+;   total processes:      100
+;   max children reached: 1
+; By default the status page output is formatted as text/plain. Passing either
+; 'html' or 'json' as a query string will return the corresponding output
+; syntax. Example:
+;   http://www.foo.bar/status
+;   http://www.foo.bar/status?json
+;   http://www.foo.bar/status?html
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set 
+;pm.status_path = /status
+ 
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+ 
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+ 
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_slowlog_timeout = 0
+ 
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+;slowlog = log/$pool.log.slow
+ 
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+ 
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+ 
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever 
+;       possible. However, all PHP paths will be relative to the chroot
+;       (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot = 
+ 
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+chdir = /
+ 
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+;catch_workers_output = yes
+ 
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+;   php_value/php_flag             - you can set classic ini defines which can
+;                                    be overwritten from PHP call 'ini_set'. 
+;   php_admin_value/php_admin_flag - these directives won't be overwritten by
+;                                     PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+;                specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M
+
+php_admin_value[error_log] = /var/log/airtime.php-fpm.error.log
+php_admin_value[post_max_size] = 500M
+php_admin_value[upload_max_filesize] = 500M
+php_admin_value[request_order] = GPC
+php_admin_value[session.gc_probability] = 0
+php_admin_value[phar.readonly] = off
+php_admin_value[upload_tmp_dir] = /tmp
diff --git a/install_full/ubuntu/airtime-full-install-nginx b/install_full/ubuntu/airtime-full-install-nginx
new file mode 100755
index 000000000..efde36b32
--- /dev/null
+++ b/install_full/ubuntu/airtime-full-install-nginx
@@ -0,0 +1,115 @@
+#!/bin/bash
+#
+# Auto install script for airtime on Ubuntu
+#
+# NGINX changes are contributed by Eugene MechanisM
+# Link to the post:
+# http://forum.sourcefabric.org/discussion/13563/first-step-to-run-airtime-via-nginx-based-on-airtime-2.0-beta-files
+
+exec > >(tee install_log.txt)
+exec 2>&1
+
+if [ "$(id -u)" != "0" ]; then
+    echo "Please run as root user."
+	exit 1
+fi
+
+#Current dir
+# Absolute path to this script, e.g. /home/user/bin/foo.sh
+SCRIPT=`readlink -f $0`
+# Absolute path this script is in, thus /home/user/bin
+SCRIPTPATH=`dirname $SCRIPT`
+
+#Prerequisite
+echo "----------------------------------------------------"
+echo " 1. Install Packages"
+echo "----------------------------------------------------"
+
+dist=`lsb_release -is`
+
+if [ "$dist" -eq "Debian" ]; then
+    grep "deb http://www.debian-multimedia.org squeeze main non-free" /etc/apt/sources.list
+    if [ "$?" -ne "0" ]; then
+        echo "deb http://www.debian-multimedia.org squeeze main non-free" >> /etc/apt/sources.list
+    fi
+fi
+
+apt-get update
+
+# Updated package list
+apt-get -y install tar gzip curl nginx php5-pgsql php5-fpm \
+php-pear php5-gd postgresql odbc-postgresql python2.6 libsoundtouch-ocaml \
+libtaglib-ocaml libao-ocaml libmad-ocaml ecasound \
+libesd0 libportaudio2 libsamplerate0 rabbitmq-server patch \
+php5-curl mpg123 monit python-virtualenv multitail libcamomile-ocaml-data \
+libvorbis-ocaml libpulse0 vorbis-tools
+
+#install packages with --force-yes option (this is useful in the case
+#of Debian, where these packages are unauthorized)
+apt-get -y --force-yes install libmp3lame-dev lame icecast2
+
+if [ "$?" -ne "0" ]; then
+   echo ""
+   echo "There was a problem with apt-get. Please check the above error and try again."
+   echo ""
+   exit 1
+fi
+
+# Install phing
+pear channel-discover pear.phing.info
+pear install phing/phing-2.4.2
+
+# NGINX Config File
+echo "----------------------------------------------------"
+echo "2.1 NGINX Config File"
+echo "----------------------------------------------------"
+if [ ! -f /etc/nginx/sites-available/airtime ]; then
+	cp $SCRIPTPATH/../nginx/airtime-vhost /etc/nginx/sites-available/airtime 
+	ln -s /etc/nginx/sites-available/airtime /etc/nginx/sites-enabled/airtime
+	service nginx reload
+else
+	echo "NGINX config for Airtime already exists..."
+fi
+
+# php-fpm Airtime pool file
+echo "----------------------------------------------------"
+echo "2.2 Airtime php pool file"
+echo "----------------------------------------------------"
+if [ ! -f /etc/php5/fpm/pool.d/airtime.conf ]; then
+	cp $SCRIPTPATH/../php5-fpm/airtime.conf /etc/php5/fpm/pool.d/airtime.conf 
+	service php5-fpm reload
+else
+	echo "Airtime php pool file already exists..."
+fi
+
+# Enable Icecast
+echo "----------------------------------------------------"
+echo "3. Enable Icecast"
+echo "----------------------------------------------------"
+cd /etc/default/
+sed -i 's/ENABLE=false/ENABLE=true/g' icecast2
+service icecast2 start
+echo ""
+
+# Enable Monit
+echo "----------------------------------------------------"
+echo "4. Enable Monit"
+echo "----------------------------------------------------"
+cd /etc/default/
+sed -i 's/startup=0/startup=1/g' monit
+
+grep -q "include /etc/monit/conf.d" /etc/monit/monitrc
+RETVAL=$?
+if [ $RETVAL -ne 0 ] ; then
+    mkdir -p /etc/monit/conf.d
+    echo "include /etc/monit/conf.d/*" >> /etc/monit/monitrc 
+fi
+
+# Run Airtime Install
+echo "----------------------------------------------------"
+echo "5. Run Airtime Install"
+echo "----------------------------------------------------"
+cd $SCRIPTPATH/../../install_minimal
+./airtime-install
+
+