added the libserial library to the development environment (part of #722)

campcaster/bin/dist.sh

@@ -164,6 +164,10 @@ taglib_dir=$toolsdir/taglib
 taglib_version=taglib-1.4
 taglib_tmpdir=$tools_tmpdir/taglib
 
+libserial_dir=$toolsdir/libserial
+libserial_version=libserial-0.5.2
+libserial_tmpdir=$tools_tmpdir/libserial
+
 pear_dir=$toolsdir/pear
 pear_tmpdir=$tools_tmpdir/pear
 
@@ -254,6 +258,9 @@ cp -pPR $gstreamer_dir/$gstreamer_version $gstreamer_tmpdir
 mkdir -p $taglib_tmpdir
 cp -pPR $taglib_dir/$taglib_version $taglib_tmpdir
 
+mkdir -p $libserial_tmpdir
+cp -pPR $libserial_dir/$libserial_version $libserial_tmpdir
+
 mkdir -p $pear_tmpdir
 cp -pPR $pear_dir/* $pear_tmpdir
 

campcaster/etc/Makefile.in

@@ -111,6 +111,8 @@ GSTREAMER_DIR     = ${TOOLS_DIR}/gstreamer
 GSTREAMER_VERSION = gstreamer-0.8.12
 TAGLIB_DIR        = ${TOOLS_DIR}/taglib
 TAGLIB_VERSION    = taglib-1.4
+LIBSERIAL_DIR     = ${TOOLS_DIR}/libserial
+LIBSERIAL_VERSION = libserial-0.5.2
 PEAR_DIR          = ${TOOLS_DIR}/pear
 
 MODULES_DIR            = ${SRC_DIR}/modules
@@ -219,6 +221,9 @@ ${TMP_DIR}/tools_setup.stamp:
 	cd ${TAGLIB_DIR}/${TAGLIB_VERSION} && ./configure --prefix=${prefix}
 	${MAKE} -C ${TAGLIB_DIR}/${TAGLIB_VERSION} install
 
+	cd ${LIBSERIAL_DIR}/${LIBSERIAL_VERSION} && ./configure --prefix=${prefix}
+	${MAKE} -C ${LIBSERIAL_DIR}/${LIBSERIAL_VERSION} install
+
 	cd ${PEAR_DIR} && ./configure --prefix=${prefix}
 	${MAKE} -C ${PEAR_DIR} install
 
@@ -230,6 +235,7 @@ tools_distclean:
 	-${MAKE} -C ${XMLRPCXX_DIR}/${XMLRPCXX_VERSION} distclean
 	-${MAKE} -C ${GSTREAMER_DIR}/${GSTREAMER_VERSION} distclean
 	-${MAKE} -C ${TAGLIB_DIR}/${TAGLIB_VERSION} distclean
+	-${MAKE} -C ${LIBSERIAL_DIR}/${LIBSERIAL_VERSION} distclean
 	${RM} ${TMP_DIR}/tools_setup.stamp
 
 doxytag_setup: ${TMP_DIR}/doxytag_setup.stamp

campcaster/etc/configure.ac

@@ -364,6 +364,7 @@ by Campcaster:
     libodbc++ 0.2.3
     taglib 1.4
     xmlrpc++ 2004-07-13
+    libstream 0.5.2
 
 using the following configuration settings:
 

campcaster/src/tools/libserial/libserial-0.5.2/bin/autogen.sh

@@ -0,0 +1,95 @@
+#!/bin/bash
+#-------------------------------------------------------------------------------
+#   Copyright (c) 2004 Media Development Loan Fund
+#
+#   This file is part of the Campcaster project.
+#   http://campcaster.campware.org/
+#   To report bugs, send an e-mail to bugs@campware.org
+#
+#   Campcaster is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   Campcaster is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with Campcaster; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+#
+#   Author   : $Author$
+#   Version  : $Revision$
+#   Location : $URL$
+#-------------------------------------------------------------------------------
+
+#-------------------------------------------------------------------------------
+# Run this to set up the build system: configure, makefiles, etc.
+# (based on the version in enlightenment's cvs)
+#-------------------------------------------------------------------------------
+
+package="libserial"
+
+# assume we're in $basedir/bin
+reldir=`dirname $0`/..
+basedir=`cd $reldir; pwd;`
+test -z "$basedir" && basedir=.
+usrdir=`cd $basedir/../../../../usr; pwd;`
+
+bindir=$basedir/bin
+etcdir=$basedir/etc
+tmpdir=$basedir/tmp
+
+cd "$tmpdir"
+DIE=0
+
+(autoheader --version) < /dev/null > /dev/null 2>&1 || {
+    echo
+    echo "You must have autoconf installed to compile $package."
+    echo "Download the appropriate package for your distribution,"
+    echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+    DIE=1
+}
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+    echo
+    echo "You must have autoconf installed to compile $package."
+    echo "Download the appropriate package for your distribution,"
+    echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+    DIE=1
+}
+
+if test "$DIE" -eq 1; then
+    exit 1
+fi
+
+if test -z "$*"; then
+    echo "I am going to run ./configure with no arguments - if you wish "
+    echo "to pass any to it, please specify them on the $0 command line."
+fi
+
+echo "Generating configuration files for $package, please wait...."
+
+configure_ac=${etcdir}/configure.ac
+configure=${tmpdir}/configure
+aclocal_m4=${tmpdir}/aclocal.m4
+
+# copy over configure.ac and acinlclude.m4 from etc to tmp,
+# as aclocal >= 1.8 is sooo unbelivably stupid that it will simply try to
+# look for configure.ac in the current directory, and include acinclude.m4
+# in aclocal.m4 it without a directory path in front
+#ACLOCAL_FLAGS="-I ${tmpdir} --acdir=${tmpdir} --output=${aclocal_m4}"
+#echo "  aclocal $ACLOCAL_FLAGS"
+#cp -f ${configure_ac} ${tmpdir}
+#cp -f ${etcdir}/acinclude.m4 ${tmpdir}
+#aclocal $ACLOCAL_FLAGS
+
+#echo "  autoheader ${configure_ac}"
+#autoheader ${configure_ac}
+
+echo "  autoconf -I ${tmpdir} -o ${configure} ${configure_ac}"
+autoconf -I ${tmpdir} -o ${configure} ${configure_ac}
+

campcaster/src/tools/libserial/libserial-0.5.2/bin/install-sh

@@ -0,0 +1,323 @@
+#!/bin/bash
+# install - install a program, script, or datafile
+
+scriptversion=2005-02-02.21
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

campcaster/src/tools/libserial/libserial-0.5.2/bin/prepare.sh

@@ -0,0 +1,53 @@
+#!/bin/bash
+#-------------------------------------------------------------------------------
+#   Copyright (c) 2004 Media Development Loan Fund
+#
+#   This file is part of the Campcaster project.
+#   http://campcaster.campware.org/
+#   To report bugs, send an e-mail to bugs@campware.org
+#
+#   Campcaster is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   Campcaster is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with Campcaster; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+#
+#   Author   : $Author$
+#   Version  : $Revision$
+#   Location : $URL$
+#-------------------------------------------------------------------------------                                                                                
+#-------------------------------------------------------------------------------
+# Run this script to prepare libserial to be configured and compiled.
+# For more information on libserial, see http://libserial.sourceforge.net/
+#-------------------------------------------------------------------------------
+product=libserial-0.5.2
+
+reldir=`dirname $0`/..
+basedir=`cd ${reldir}; pwd;`
+bindir=${basedir}/bin
+etcdir=${basedir}/etc
+tmpdir=${basedir}/tmp
+
+tar=$basedir/src/$product.tar.gz
+
+mkdir -p ${tmpdir}
+
+# copy over install-sh, as AC_CONFIG_SUBDIRS will be looking for it
+cp -r $bindir/install-sh $tmpdir
+
+cd ${tmpdir}
+if [ ! -d $product ]; then
+    tar xfz ${tar}
+    cd $product
+    # put patches here
+fi
+

campcaster/src/tools/libserial/libserial-0.5.2/configure

@@ -0,0 +1,52 @@
+#!/bin/sh
+#-------------------------------------------------------------------------------
+#   Copyright (c) 2004 Media Development Loan Fund
+#
+#   This file is part of the Campcaster project.
+#   http://campcaster.campware.org/
+#   To report bugs, send an e-mail to bugs@campware.org
+#
+#   Campcaster is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   Campcaster is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with Campcaster; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+#
+#   Author   : $Author$
+#   Version  : $Revision$
+#   Location : $URL$
+#-------------------------------------------------------------------------------
+
+#-------------------------------------------------------------------------------
+#   Run this script to configure the environment.
+#
+#   This script in effect calls the real automake / autoconf configure script
+#-------------------------------------------------------------------------------
+
+# assume we're in $basedir
+reldir=`dirname $0`
+basedir=`cd $reldir; pwd;`
+test -z "$basedir" && basedir=.
+
+bindir=$basedir/bin
+tmpdir=$basedir/tmp
+
+
+autogen=$bindir/autogen.sh
+configure=$tmpdir/configure
+
+if [ ! -x $configure ]; then
+    (cd $basedir && $autogen $*)
+fi
+
+(cd $tmpdir && $configure $*)
+

campcaster/src/tools/libserial/libserial-0.5.2/etc/Makefile.in

@@ -0,0 +1,85 @@
+#-------------------------------------------------------------------------------
+#   Copyright (c) 2004 Media Development Loan Fund
+#
+#   This file is part of the Campcaster project.
+#   http://campcaster.campware.org/
+#   To report bugs, send an e-mail to bugs@campware.org
+#
+#   Campcaster is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   Campcaster is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with Campcaster; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+#
+#   Author   : $Author$
+#   Version  : $Revision$
+#   Location : $URL$
+#-------------------------------------------------------------------------------
+
+#-------------------------------------------------------------------------------
+#   General command definitions
+#-------------------------------------------------------------------------------
+MKDIR      = mkdir -p
+RM         = rm -f
+RMDIR      = rm -rf
+DOXYGEN    = doxygen
+DOXYTAG    = doxytag
+XSLTPROC   = xsltproc
+ECHO       = @echo
+FLAWFINDER = flawfinder
+
+
+#-------------------------------------------------------------------------------
+#   Basic directory and file definitions
+#-------------------------------------------------------------------------------
+BASE_DIR     = .
+BIN_DIR      = ${BASE_DIR}/bin
+DOC_DIR      = ${BASE_DIR}/doc
+DOXYGEN_DIR  = ${DOC_DIR}/doxygen
+COVERAGE_DIR = ${DOC_DIR}/coverage
+ETC_DIR      = ${BASE_DIR}/etc
+TMP_DIR      = ${BASE_DIR}/tmp
+
+LIBSERIAL_VERSION   = libserial-0.5.2
+LIBSERIAL_DIR       = ${TMP_DIR}/${LIBSERIAL_VERSION}
+
+prefix = @prefix@
+# datadir will be defiend as ${prefix}/share, so we need to define ${prefix}
+# above
+docdir = @datadir@/doc/${LIBSERIAL_VERSION}
+
+
+#-------------------------------------------------------------------------------
+#   Targets
+#-------------------------------------------------------------------------------
+all: ${TMP_DIR}/all.stamp
+${TMP_DIR}/all.stamp:
+	${MAKE} -C ${LIBSERIAL_DIR}
+	${MAKE} -C ${LIBSERIAL_DIR} docs
+	touch ${TMP_DIR}/all.stamp
+
+install: all ${TMP_DIR}/install.stamp
+${TMP_DIR}/install.stamp:
+	${MAKE} -C ${LIBSERIAL_DIR} install
+	${MKDIR} ${docdir}
+	cp -pPR ${LIBSERIAL_DIR}/doc/html ${docdir}
+	touch ${TMP_DIR}/install.stamp
+
+clean:
+	${MAKE} -C ${LIBSERIAL_DIR} clean
+	${RM} ${TMP_DIR}/*.stamp
+
+distclean:
+	${RM} ${TMP_DIR}/*.stamp
+	${RMDIR} ${LIBSERIAL_DIR}
+	${RMDIR} ${TMP_DIR}/auto* ${TMP_DIR}/config* ${TMP_DIR}/install-sh
+

campcaster/src/tools/libserial/libserial-0.5.2/etc/configure.ac

@@ -0,0 +1,54 @@
+dnl-----------------------------------------------------------------------------
+dnl Copyright (c) 2004 Media Development Loan Fund
+dnl
+dnl This file is part of the Campcaster project.
+dnl http://campcaster.campware.org/
+dnl To report bugs, send an e-mail to bugs@campware.org
+dnl
+dnl Campcaster is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl Campcaster is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with Campcaster; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+dnl
+dnl
+dnl Author   : $Author$
+dnl Version  : $Revision$
+dnl Location : $URL$
+dnl-----------------------------------------------------------------------------
+
+dnl-----------------------------------------------------------------------------
+dnl NOTE: Run all configure related scripts from the tmp directory of the
+dnl project.
+dnl This is due to the fact that configure spreads a lot of trash around,
+dnl like atom4te cache directories, config.* files, etc. into the directory
+dnl it is being run from. We clearly don't want these in our base directory.
+dnl-----------------------------------------------------------------------------
+AC_INIT(libserial, 0.5.2, bugs@campware.org)
+AC_PREREQ(2.59)
+AC_COPYRIGHT([Copyright (c) 2004 Media Development Loan Fund under the GNU GPL])
+AC_REVISION($Revision$)
+
+AC_CONFIG_SRCDIR(../src/libserial-0.5.2.tar.gz)
+
+
+dnl untar the sources before anything happens
+../bin/prepare.sh
+
+cd ../tmp/libserial-0.5.2
+./configure --prefix=$prefix
+cd -
+
+
+AC_CONFIG_FILES(../Makefile:../etc/Makefile.in)
+
+AC_OUTPUT()
+